Results 1 to 6 of 6

Thread: LMM rail pressure

  1. #1
    Member
    Join Date
    Apr 2006
    Posts
    53

    Default LMM rail pressure

    I am unable to raise the desired rail pressure on my LMM. I have changed all the tables that are associated. I have also tried changing the rail pressure at idle with no luck....... Could you guys please look into these issues,

  2. #2
    Member
    Join Date
    Apr 2006
    Posts
    53

    Default

    #@#$$@ help please!!!!! $^&@!*#(

  3. #3
    Lifetime Member
    Join Date
    Jan 2006
    Posts
    387

    Default

    If it's your own tune not a"purchased" tune post it and some logs and I'm sure people with help.
    04 LB7
    2010 LMM
    2015 LML

  4. #4
    Lifetime Member
    Join Date
    Feb 2007
    Posts
    517

    Default

    What OS?

  5. #5
    Member
    Join Date
    Apr 2006
    Posts
    53

    Default

    8594 OS. It doesn't seem to matter what I change, desired rail pressure in the tune WILL NOT match the desired rail pressure on the scan tool if it is different value than the tune came from the factory with. I can load a tune with every rail pressure table set to 180MPA across the board, and fire the truck up check it with the scan tool and it's still 30MPA desired. Same goes for WOT, 180MPA is MAX. I've checked over every parameter/limiter and it just cannot be raised.

  6. #6
    New Member
    Join Date
    Nov 2012
    Posts
    2

    Default

    I have the same problem with my 08 LMM. It is the 8594 OS as well.

Similar Threads

  1. Rail Pressure
    By mstordahl in forum Cummins 5.9L
    Replies: 3
    Last Post: June 11th, 2012, 10:27 PM
  2. Rail Pressure tuning help?
    By AdamRRT in forum Cummins 5.9L
    Replies: 7
    Last Post: October 24th, 2011, 12:00 PM
  3. 6.7L rail pressure sensor in a 5.9?
    By skneeland in forum Cummins 5.9L
    Replies: 21
    Last Post: September 15th, 2011, 04:35 AM
  4. fuel rail pressure
    By drdarthinvader in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: January 8th, 2009, 06:17 PM
  5. Fuel Rail Pressure
    By Dave Lewis in forum Duramax LB7
    Replies: 25
    Last Post: July 30th, 2006, 01:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •