Results 1 to 5 of 5

Thread: '08 LLT controlled by new ECM?

  1. #1
    New Member
    Join Date
    May 2010
    Posts
    6

    Default '08 LLT controlled by new ECM?

    Has anyone explored this option?

    I have low mileage '08 SIDI 3.6L LLT from a CTS that I would love to be able to tune and put in as a stand-alone application. It has the Bosch ECM now. Would it be possible to wire the existing harness into one of the new ECM computers to allow control and tuning of this engine with EFILive?

    If not, any ideas on making it a stand alone. I do have the body module if that helps.

    Thanks!

    Dave

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,760

    Default

    Hi Dave, we don't have any plans to support this ECM, however, I think Trifecta are the only ones out there able to program that ECM for a stand alone application, you might want to check with them.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  3. #3
    New Member
    Join Date
    May 2010
    Posts
    6

    Default

    Thanks for the reply GMPX. I may go that route with Trifecta as it would probably be easiest.

    I was just curious if it would be possible to merge the '08 harness into one of the new EFILive supported SIDI computers and tune from there.

  4. #4
    New Member
    Join Date
    May 2010
    Posts
    6

    Default

    Something like an E39 ECM re-pinned to the LLT and start with the closest base program, go from there.

  5. #5
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,760

    Default

    I don't know if the engine hardware is the same between the two, the high pressure pump, injectors etc might be different.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


Similar Threads

  1. New ECM ? Have question bout vin license an efi live to new ECM
    By Collins in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: June 15th, 2012, 09:19 AM
  2. Can the 1-4 shift light be controlled on the e38s like the 0411 PCM?
    By Highlander in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: March 10th, 2011, 12:33 PM
  3. Need LBZ ecm, willing to give immacculate LMM ecm as exchange
    By badassmax in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: January 9th, 2011, 03:20 AM
  4. Replies: 28
    Last Post: December 23rd, 2008, 01:22 AM
  5. Using the pcm controlled shift light
    By Chris81 in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: December 4th, 2008, 04:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •