Results 1 to 4 of 4

Thread: edge change vallues!

  1. #1
    New Member titanspanker01's Avatar
    Join Date
    Feb 2006
    Posts
    7

    Default edge change vallues!

    I have had my efi live for about a week, really confused mostly! i was wondering if the edge on 0/5 (stock) will make info incorrect when logging!

    stupid chips.

  2. #2
    Senior Member lakingslayer's Avatar
    Join Date
    Dec 2005
    Posts
    180

    Default

    Probably. On the LLY it has been discussed on another forum that the Edge kept the boost and timing increases on the 0 setting. Of course your ECM doesn't know it. It's best to log without the Edge installed at all. There's no reason to have the edge once you get a nice tune done. Good luck.

  3. #3
    Junior Member Danville Performance's Avatar
    Join Date
    Jan 2006
    Posts
    34

    Default The Edge

    If you have the EFILive and know what you are doing(It will come to you) then the Edge is useless to you. If you are one that goes back and forth than the Edge is a good thing for you. I use them for my customers that are farmers because they don't need to pull a trailer in race tune but on Saturday nights they want to be able to just push a button and have the race tune if they need and then they can go right back to tow mode with it. It is a good tuner for the diesel trucks that are used for towing more than they are used for racing. Just my .02 cents worth. I would like to buy a Duramax truck with a M6 just to see what I can do with it with the EFILive software.

  4. #4
    New Member
    Join Date
    Jan 2006
    Posts
    5

    Default

    The edge only modifies only timming and fuel.

Similar Threads

  1. 2007 LMM/EDGE products?
    By GAMEOVER in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 10
    Last Post: December 18th, 2008, 03:02 PM
  2. Tech Edge 2J1 HELP.....
    By vxleather in forum Gen IV V8 Specific
    Replies: 6
    Last Post: July 30th, 2008, 03:07 PM
  3. Tech edge wb use with v2 bbl
    By AGRO in forum FlashScan V2 BB Logging
    Replies: 14
    Last Post: April 28th, 2008, 10:58 PM
  4. AFR PID for Tech Edge
    By pkincy in forum General
    Replies: 0
    Last Post: April 8th, 2007, 02:20 PM
  5. Keep Edge J/A or not?
    By serpa4 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: February 11th, 2007, 10:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •