Results 1 to 4 of 4

Thread: DSP5 wiring

  1. #1
    New Member
    Join Date
    Jun 2012
    Posts
    8

    Default DSP5 wiring

    i have a LLY and was going by the instructions from EFILive v7 tutorial. but there are some in consisatancies.. it is showing the blue connector on the pictures and the paper that came with the DSP5 switch says to use J3 connector which is a grey connector,which is the bottom connector on my ECM can someone clarify this? and can i run my truck before i put a custom tune in it with the switch installed?

  2. #2
    Senior Member
    Join Date
    Mar 2009
    Posts
    188

    Default

    I don't have the instructions in front of me so I can't help with that but I do know you can run your truck with a switch installed without a custom tune.
    2002 Chevy Duramax with a few supporting mods.

  3. #3
    Lifetime Member
    Join Date
    Apr 2008
    Posts
    269

    Default

    In the tutorial the LLY for DSP2 uses the Gray connector. On the LB7 which is a different controller uses the blue connector. From the tutorial on LB7 and LLY DSP page 14.

    LB7
    Signal = Blue connector, pin 69
    Ground = Blue connector, pin 49
    LLY
    Signal = Grey connector, pin 32
    Ground = Grey connector, pin 50

    Now the what you are seeing is the following. The portion with the pic is discussing the connection for the DSP Output option. Not the Switch. It uses the blue connector for that as described on page 15.
    The connections to the ECM output are made to the following pins –
    LB7
    Output = Blue connector, pin 39
    LLY
    Output = Blue connector, pin 27

    No problem installing the switch before a DSP5 tune applied. The pins on the ECM are inert to the GM tuning so nothing happens. Some have both DSP2 and DSP5 switches installed to make changes to what they want. But only one or the other if the correct DSP program is in will be actively seen by the ECM.

    Brian
    2007.5 GMT-900 Chevrolet Silverado 2500HD CC/LB LTZ 4x4 Summit White.
    With the LMM Duramax 365hp/660tq, MW7 Allison 1000 6-speed
    EFILive LMM DSP5 Settings, 500HP, 450HP, 400HP,Tow with Turbine Brake, and Stock HP.

    UA Steamfitter, Local 136 Evansville, IN - Remember if you want to play you got to pay.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Moved to Scanning -> Diesel.

Similar Threads

  1. V2 with LC-1 wiring
    By JUSTASBC in forum FlashScan V2
    Replies: 5
    Last Post: August 4th, 2010, 01:13 PM
  2. LLY DSP5 Wiring, per directions but holes occupied?
    By chad231 in forum Duramax LLY
    Replies: 7
    Last Post: November 23rd, 2009, 09:44 AM
  3. LM-1 Wiring and logging
    By DaddySS in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: May 30th, 2007, 03:43 PM
  4. Need Help Wiring up Sm-AFR to V2
    By Chalky in forum General
    Replies: 3
    Last Post: March 11th, 2007, 04:36 AM
  5. wiring
    By 69camaro5speed in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: January 27th, 2006, 05:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •