I'm workin on my 06 CTS-V with an E67 ECM and some of the TuneTool table axis's call out for E38xxx PID's, but the ScanTool will not log any of the E38 PID's. It will log the E67 PID's fine. In cal_link text the call outs for some of the E67 PID's show E38xxx as an axis address, do I just need to add the E67xxx PID names to each axis address that has E38 or change the 38 to 67? I updated to the latest software and firmware but it still seems like there is an issue.