sometimes the H&S trick does not work. It leaves the bootloader intact. Smarty has always worked for us.
sometimes the H&S trick does not work. It leaves the bootloader intact. Smarty has always worked for us.
Anarchy Diesel Tuning/ Advanced Injection Diesel Technologies
EFI Live Cummins Beta Tester
Duramax and Cummins Tuning
423-506-7427
It says anti tuning Bb then flash aborting and it has me cycle the key off
It has the 601 boot block too
Your vehicle cannot be tuned with EFILivein it's current format.
As others have indicated, flashing with either H&S or Smarty will return your OS to being supported.
Cheers
Cindy
I no longer monitor the forum, please either post your question or create a support ticket.
I've never had luck with H&S. have a Smarty on the shelf for these trucks. Works every time.
Dan's Diesel Performance
www.dansdieselperformance.com
I have a 2010 c&c the truck is gutless.
Am I reading this correctly that I can flash in a factory stock tune and the truck will run?
If so I think a regular non c&c tune will suit me fine. Our stock '08 3500 non-c&c will run circles around the 2010.
no you cant with efi - 2010 & newer have different controller, h&s or smarty are options right now
sorry i did not see it was old body c&c. you should be ok, takes a little more work
subd
2015 3500HD crew cab long bed, 6" fabtech, slightly tuned, emissions intact.
2005 dmax ccsb, EFI live tuned DSP 5 Full built motor, S471 billet single, More better built trans this time. and lots of other things.
1984 CJ7 powered by a 2000 LS1. 4L60E.
2012 Jetta TDI 6 speed manual, (yes the dirty the bastard haha)
2003 Jetta TDI,
1986 K10 LQ4/4L80E