Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: flash pinouts

  1. #11
    New Member
    Join Date
    Feb 2016
    Posts
    5

    Default

    Does anyone happen to have the E92? Im wondering if it is the same as the E39.

    Also I am looking for the E55, and E83 Diagrams if anyone is able to help.

  2. #12
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    You can purchase 3 days of access to all GM manuals for $20, from the ACDelco website.

    Sign up on a Friday - order in pizza all weekend - and download as many schematics as you would like.

  3. #13
    New Member
    Join Date
    Feb 2016
    Posts
    5

    Default

    I have access to diagrams through alldata, Im still having trouble getting a couple to communicate

    I havent tried the e83, e92 or e39 yet. I have worked on the e55 as well as another Cadillac controller that I dont know the exact controller designation.

    I am having trouble getting the e55 and the other Cadillac controller to communicate. I read somewhere that the low speed serial bus in the Cadi controllers wakes up the ecm to allow high speed data. I messed with them last weekend and got nothing out of either of them.

    Guess I will just have to keep messing with them. EFI Connection must have figured it out because they sell a harness for the e55.

  4. #14
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    Are you trying to build harnesses to bench read / flash controllers ?

  5. #15
    New Member
    Join Date
    Feb 2016
    Posts
    5

    Default

    Yes, I have the pinouts from the computer. hooked up ground, 12v power, ignition voltages and CAN but couldnt get anything out of them. Only ones so far that have given me this much trouble.

  6. #16
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    For the price EFI Connection charges (Speartech's prices are higher) for their bench harnesses - doing it yourself is not really cost saving - if you factor in materials and all of the time spent.

    Just my 2 cents ...

    If you have the power (battery and ignition), ground, and CAN High and Low wired correctly, then perhaps you have omitted the Accessory Wakeup input (wire this to 12 volt ignition).

  7. #17
    New Member
    Join Date
    Feb 2016
    Posts
    5

    Default

    I included it also but cant seem to get it to do a darn thing. I will try again. Maybe im overlooking something.

  8. #18
    New Member
    Join Date
    Feb 2016
    Posts
    5

    Default

    Went back through everything today and still nothing.

    I have attached the pinouts of the one I am working on. Anyone see anything I am missing?


    I have......

    Connector 1

    1- CAN
    2- CAN
    17 - Switched 12v
    18 - Switched 12v
    19 - Switched 12v
    20 - 12v Battery
    46 - switched 12v

    Connector 2
    73 - Ground
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	1.gif 
Views:	284 
Size:	26.4 KB 
ID:	19323   Click image for larger version. 

Name:	2.gif 
Views:	255 
Size:	28.3 KB 
ID:	19324   Click image for larger version. 

Name:	3.gif 
Views:	231 
Size:	14.5 KB 
ID:	19325   Click image for larger version. 

Name:	4.gif 
Views:	233 
Size:	26.0 KB 
ID:	19326  

  9. #19
    New Member
    Join Date
    Mar 2009
    Posts
    5

    Default

    Download station info E78= J1-19=battery pos
    J1-20=battery pos
    J1-43=can low
    J1-29=can high
    J2-13=switched 12v+
    J2-28=switched 12v+
    J2-73= gnd

    WORKED FOR ME THANKS

Page 2 of 2 FirstFirst 12

Similar Threads

  1. E40 Pinouts
    By JimmyJazz in forum General
    Replies: 0
    Last Post: September 1st, 2010, 06:28 PM
  2. E38 Pinouts
    By Tre-Cool in forum E37, E38 & E67 PFI ECM's
    Replies: 12
    Last Post: June 18th, 2009, 09:51 AM
  3. E38 PCM Pinouts
    By vxchev8 in forum Gen IV V8 Specific
    Replies: 15
    Last Post: March 2nd, 2009, 08:28 PM
  4. E38 Pinouts
    By Harrismarine in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: October 27th, 2008, 06:53 AM
  5. LS1 ECM Pinouts
    By Cougar281 in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: July 29th, 2007, 01:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •