Page 4 of 4 FirstFirst ... 234
Results 31 to 33 of 33

Thread: What PID to scan commanded afr & injector duty cycle for e78

  1. #31
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    612

    Default

    Thanks Paul and Joe I will post log ASAP
    One last problem i have with E78
    when i select an area in the log it should mark the same area in the high octane or low octane spark tables in tune tool but it does not
    I tried to log E78.APCYL_DMA and GM.CYLAIR_DMA without luck
    EFILive Tuner

  2. #32
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,726

    Default

    scantool/tunetool linking (if you enabled in the tunetool properties) only occurs if you logged the link pids mentioned on the axises of the table in the tunetool...

    if the table axes don't mention the link pids you want, you can edit cal_link.txt (in the folder C:\Program Files\EFILive\V7.5\Configuration)

    [ locate the table by it's id, and add the pids you want (separating with a comma , ) ]

    ( if you look in calc_link.txt you can see examples of multiple link pids on tables axes ).

  3. #33
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,726

    Default

    For example:

    in calc_link.txt you will find:

    Code:
    ;High octane spark map
    B5913.ROW=SAE.RPM
    B5913.COL=GM.DYNCYLAIR_DMA,GM.CYLAIR_DMA,GM.DYNCYLAIR,CALC.CYLAIR
    
    ;Low octane spark map
    B5914.ROW=SAE.RPM
    B5914.COL=GM.DYNCYLAIR_DMA,GM.CYLAIR_DMA,GM.DYNCYLAIR,CALC.CYLAIR
    
    you would edit those like this (don't forget the commas):

    Code:
    ;High octane spark map
    B5913.ROW=SAE.RPM
    B5913.COL=GM.DYNCYLAIR_DMA,GM.CYLAIR_DMA,GM.DYNCYLAIR,CALC.CYLAIR,E78.APCYL_DMA,GM.CYLAIR_DMA
    
    ;Low octane spark map
    B5914.ROW=SAE.RPM
    B5914.COL=GM.DYNCYLAIR_DMA,GM.CYLAIR_DMA,GM.DYNCYLAIR,CALC.CYLAIR,E78.APCYL_DMA,GM.CYLAIR_DMA

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. Injector Duty Cycle & PIDS Frustrations!!
    By TBMSport in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: September 5th, 2011, 04:19 PM
  2. Injector pulse width & duty cycle
    By etmotorsports in forum Gen III V8 Specific
    Replies: 26
    Last Post: November 11th, 2010, 03:53 PM
  3. Injector PW & Duty Cycle
    By LS1_Dragster in forum Gen III V8 Specific
    Replies: 3
    Last Post: June 15th, 2008, 03:39 PM
  4. Injector Duty Cycle ?
    By DrX in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: April 9th, 2006, 04:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •