throttle follower question
throttle cracker aug11 2012.efi Don't know why but on my throttle follower scan it wants me to add .35 on the 23.55% throttle. It seems very odd that it jumps that high in that catogory.. Any ideas??? Here is a copy of my scan.
Also on a m6 car when you add to the throttle follower which decay rate are you supposed to adjust by the same percentage??
Last edited by smslyguy; August 11th, 2012 at 03:03 AM.
2001 camaro z28 ss vert with factory slp upgrades, Hooker long tubes, 3"y-pipe to a 4" muffler, ,airlid,s.s.r.a. ,t.c.bypass,descreened m.a.f. 232/234 .595,.598 +2 comp cam with ported and polished stock heads with .650 lift dual springs and a bowl grind. tuned with EFI Live. All combined to achieve 29 m.p.g. and 399 r.w.h.p. with 384 lbs of torque. sold...
Now own a 2015 1LE camaro
not sure what you mean here, how do you mean "add" 0.35 on the 23.55% throttle. Really need to see the tune posted as well.
Throttle follower is better described (at least I think so) as a throttle "leader". IE: it leads the throttle movement with a coresponding movement in the Idle control solenoid by a pre determined amount set in the table. It affects the feel of clutch engagement, or gently pulling away from a stop in an auto. Once you're nailing the throttle it becomes irrelevant. Once you're past about 3 to 4% throttle, where it all matters, forget about it. Its a feel or drivibility setting really. Hope this helps,
cheers,
Mike
"Just a tune > yeah right !!!! "
smslyguy,
which pid are you referring to (GM.IAC_TF_DMA...?)...?
post your tune file, and also indicate which frame # in the log file in post #1.
Posting Permissions
Reply With Quote