Auto VE Tuning Data Filter Question

[jeff keyuk]

Hi Joe! Its gota be rich! I can smell the gas fumes,Do you think I have the WB.set up wrong! Its a FAST meter ! I have the out put configured PID: AFR-LM1 ,oh !!!!!Its corresponding ratio AFR ÈBase Efficiency Numerator LM1 (Ben) pid.Is that my problem!!

[jeff keyuk]

Hey Joe! Do you think my trouble might be with my setting up the fast W/B. When I tune it on, it ask me for Options!

1) Type of Fuel ! I check Gasoline.
2) Do you enable the analog output. I check YES.
And here were I might be going wrong!
3) Simple Mode;
It will ask, calcuate the A/F ratio by multiplying the volts by 10. Ive been clicking NO!and going with the Highres Mode:
0-4.096 volts A/F calc.
gas (V*2.78)+9.6

[jeff keyuk]

Hi Joe! Made changes to tablesB0101 VE table is back to my stock tune.
B3618,B3605 are adjusted back to my stock. What are the setting I set to for the VE tuning in these tables????
B4105 has been fixed .that one cell 525-525
b5913 is my stock tune,I made the changes to the B5914 back to my stock tune. I made those change thats what they said to do in the AuotVE Tutorial.
can you give me a call.thanks jeff

[jeff keyuk]

Hey joe! After making the changes,went out to see what I got.What do you think!

[joecar]

That looks much better... paste-multiply it into the VE table and take a new log.