Page 4 of 4 FirstFirst ... 234
Results 31 to 34 of 34

Thread: help setup LC1 to V2

  1. #31
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  2. #32
    New Member
    Join Date
    Mar 2014
    Posts
    5

    Default

    Thanks for that. Just because I like to be sure, this is what I'm after right?

    Click image for larger version. 

Name:	V2-LC1.png 
Views:	189 
Size:	35.4 KB 
ID:	16522

  3. #33
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yes, that's correct.

  4. #34
    New Member
    Join Date
    Mar 2014
    Posts
    5

    Default

    I have an Innovate DB gauge, in the installation instructions, it says to tie the ground to the same ground source shared with the wideband controller.

    Presumably this doesn't need to be on the same bung, so long as it's the same ground?

    Also, I guess the 12V switched (for illumination) doesn't need to be the same 12V switched source as the controller (presumably better if it's separate?)

    For reference the Innovate install instructions are here.

    My apologies for the simple questions, here's another diagram just in case it helps someone in the future understand

    Click image for larger version. 

Name:	V2-LC1-DBGauge.png 
Views:	177 
Size:	56.0 KB 
ID:	16524

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. injector setup
    By odd boy in forum Gen IV V8 Specific
    Replies: 1
    Last Post: March 17th, 2011, 08:42 AM
  2. Calc VE Setup
    By DPS in forum Tutorials
    Replies: 22
    Last Post: April 18th, 2010, 09:48 AM
  3. setup info ??
    By 2004gmc in forum Lounge
    Replies: 9
    Last Post: May 12th, 2009, 11:31 AM
  4. RR Setup
    By Harrismarine in forum RoadRunner Real-Time PCM Emulator
    Replies: 29
    Last Post: May 12th, 2009, 02:25 AM
  5. LC1 setup for e85 ?
    By yellowC6ohio in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 13th, 2008, 03:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •