Page 5 of 7 FirstFirst ... 34567 LastLast
Results 41 to 50 of 63

Thread: 4l80e parameters to prevent TCC from disengaging in 4th gear

  1. #41
    Junior Member
    Join Date
    Jan 2014
    Posts
    31

    Default

    Reviving an old thread... but any confirmation the TCC lock on decel for 4l80E's in trucks is working? Still interested in being able to keep mine locked!

  2. #42
    Junior Member
    Join Date
    Jul 2013
    Posts
    43

    Default

    Still interested in this as well.

  3. #43
    Lifetime Member
    Join Date
    Oct 2005
    Posts
    551

    Default

    Worked for me
    2017 Camaro SS, 2014 Ram 2500 4x4 Cummins 6.7L, 2004 Chevy Avalanche Z71 4̶X̶4̶(now 2WD), 5870lb race weight, 10.93@ 124, Twin TVS1900s, Twin Throttle, 429 LSX, 4L80E, custom 14 bolt rear, V2, R̶o̶a̶d̶R̶u̶n̶n̶e̶r̶(dead), COS3......
    Gettin' the Groceries

  4. #44
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    What os number?
    "All that is needed for the triumph of evil is that good men do nothing..."

  5. #45
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    chevyspence and tdmkr496 ... post the tunes that you would like patched, then PM me your email address.

    I don't mind patching a Gen 3 OS at no charge from time to time. I charge a fee for the Gen 4 (T42).

  6. #46
    Junior Member
    Join Date
    Jan 2014
    Posts
    31

    Default

    Hey Taz, that would be awesome! My current tune file is attached. It seems like I don't have the ability to PM on here (maybe my post count is still too low?) but I updated my settings to allow emails from members if you are able to give that a shot. if not let me know and I'll figure something out.
    Thanks!!!

    071816 modX - chevyspence request TCC decel lock.ctz

  7. #47
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ( pm count has to reach 10 for pm's )

  8. #48
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    BTW: it's not a good idea to lock the TCC in 2nd gear like you have at 75+% TP... it will slip.

  9. #49
    Junior Member
    Join Date
    Jan 2014
    Posts
    31

    Default

    Ah, thanks for the PM info, coincidentally it looks like i just reached it lol.

    Thanks for the tip on the 2nd gear slip too. I have a billet converter with HD clutch, but honestly I never have checked for slip at WOT so I should probably do that. That was kind of a remnant from when the 6.0l was in there and I had to occasionally use 2nd to pull the big trailer up mountain passes, and assuming that would keep the trans slightly cooler. But, being that the big block never needs to downshift I could probably just get rid of the lock anyway.

  10. #50
    Junior Member
    Join Date
    Jul 2013
    Posts
    43

    Default

    Taz, attached is my current tune, thank you for the help I appreciate it!! I will PM you my email address.
    Attached Files Attached Files

Page 5 of 7 FirstFirst ... 34567 LastLast

Similar Threads

  1. trans not going into 4th gear even though log says it is?
    By SimpleManLance in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 5
    Last Post: December 21st, 2011, 01:25 AM
  2. 4l80e 4th gear and tcc problem (running from 4L60E segment)
    By kkustomz in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 35
    Last Post: November 28th, 2011, 02:05 PM
  3. Need to hold 4th gear for dyno
    By samdweezel05 in forum Allison 5 & 6 Speed
    Replies: 24
    Last Post: July 1st, 2011, 01:54 PM
  4. Holding 4th gear for Dyno
    By Matt68 in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 11
    Last Post: May 30th, 2011, 03:59 PM
  5. Keep TCC locked in 4th gear
    By FnGone in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 10
    Last Post: February 24th, 2008, 11:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •