Results 1 to 1 of 1

Thread: Idle 4.8 to 6.0 conversion

  1. #1
    Senior Member
    Join Date
    Dec 2007
    Posts
    191

    Default Idle 4.8 to 6.0 conversion

    Truck idles fine the for no reason pulsewidth jumps up map go higher, happens at random times. This truck was brought to me to tune i didn't build the motor or anything so not sure if it is mechanical but did check for vacuum leaks and didn't find any. Check out log

    Also shft and ltft are different every time it goes from +25% to -14% with the same ve table.

    dis regard that log it was the wrong one

    07ClassicTruckassumestkCIDChange_0012.tun
    Attached Files Attached Files
    Last edited by etmotorsports; August 31st, 2012 at 02:12 PM. Reason: worng logfile
    David McLain
    www.etdrag.com

Similar Threads

  1. VE a6 to m6 conversion help
    By JCA in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: August 15th, 2012, 01:25 PM
  2. Anyone Do a Carb Conversion.
    By TBMSport in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: September 19th, 2010, 08:39 AM
  3. E85 Conversion
    By duramax2500hd in forum Petrol / Gas
    Replies: 2
    Last Post: June 15th, 2010, 12:12 PM
  4. E-85 conversion tuning....
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 12
    Last Post: July 24th, 2008, 10:52 AM
  5. E-85 Conversion
    By vatman02 in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: May 26th, 2008, 01:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •