Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: V1 user

  1. #1
    Senior Member DocZ28's Avatar
    Join Date
    Mar 2007
    Posts
    105

    Default V1 user

    Hi I'm a V1 user, and I'm having problems to connect into a PCM
    I just upgrade the software. And I can not connect to any pcm to scan or tune. I only can read my car.
    In the past I did not have this problem, I have 9 pcm licenced to my cable.
    Two days ago I purchase a licence and start to tune a LS1B Pcm, Now I don even can scan the car. But if I read my car, ther is no problem.
    What can I do?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,782

    Default

    Which V7 software build version do you have installed (go Help->About)...?

    Can you post some screenshots...?

  3. #3
    Senior Member DocZ28's Avatar
    Join Date
    Mar 2007
    Posts
    105

    Default

    Version V7.5.7 (Build 211)
    Licence Commercial Scan and Tune

  4. #4
    Senior Member DocZ28's Avatar
    Join Date
    Mar 2007
    Posts
    105

    Default

    Click image for larger version. 

Name:	Imagen5.png 
Views:	78 
Size:	314.0 KB 
ID:	13855Click image for larger version. 

Name:	Imagen1.png 
Views:	88 
Size:	224.6 KB 
ID:	13856Click image for larger version. 

Name:	Imagen2.png 
Views:	86 
Size:	246.4 KB 
ID:	13857Click image for larger version. 

Name:	Imagen3.png 
Views:	86 
Size:	107.6 KB 
ID:	13858Click image for larger version. 

Name:	Imagen4.png 
Views:	79 
Size:	275.5 KB 
ID:	13859

  5. #5
    Senior Member DocZ28's Avatar
    Join Date
    Mar 2007
    Posts
    105

    Default

    Click image for larger version. 

Name:	Imagen6.png 
Views:	87 
Size:	89.8 KB 
ID:	13860

  6. #6
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,798

    Default

    You cannot have both the Scan tool and Tune tool connected to the PCM at the same time (ie, you need to disconnect from the PCM in the Scan tool in order for the Tune tool to work). Try closing the Scan tool and flashing again.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, starting the mods
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  7. #7
    Senior Member DocZ28's Avatar
    Join Date
    Mar 2007
    Posts
    105

    Default

    The problem is that the cable is only working in my car's pcm I can tune and scan.

    But in other pcm it can't be connected. Drops this error. And they are already licenced to my cable.

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,782

    Default

    The other car has a ALDL connector wiring problem...?

  9. #9
    Senior Member DocZ28's Avatar
    Join Date
    Mar 2007
    Posts
    105

    Default

    No no problem at all.

    I notice this few day ago when I couldnĀ“t read 2 1998 Ls1 PCM, I think that was for the software update
    Cuz Last Sunday I purchase a licence, download the file of an 2000 LS1, made some changes and upload the file and monitor with the scan. But this monday I could not connect any more.

    But as I tell before with my car I have not any problem, is also a 2000 Ls1 camaro.

    Could it be due to a configuration?

  10. #10
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Please try using the V8 software to read/flash your PCM.

    Sorry my mistake, I didn't realize you had a V1 interface.
    So in that case, please supply the appropriate *.blx trace files as described in this web page:
    http://support.efilive.com/kb_articl...8254-QOGC-9586

    Regards
    Paul
    Before asking for help, please read this.

Page 1 of 3 123 LastLast

Similar Threads

  1. Please Help a New User
    By Tuned55 in forum General
    Replies: 10
    Last Post: September 19th, 2010, 02:06 PM
  2. New user
    By VACARELLAB in forum Duramax LB7
    Replies: 2
    Last Post: April 4th, 2009, 03:39 PM
  3. User installation
    By BackinBlack02SS in forum FlashScan V2
    Replies: 3
    Last Post: November 26th, 2008, 09:41 AM
  4. New user needs help
    By LowETz in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 4th, 2007, 01:39 PM
  5. New user with questions.
    By turbolou in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: June 27th, 2005, 12:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •