Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: IAT Sensor Cal

  1. #1
    Member
    Join Date
    Aug 2011
    Posts
    65

    Default IAT Sensor Cal

    I know HP tuners just released this feature, but it gives the ability to recalibrate the iat scale when changing over to a ls7/ls3 card style maf. Is this feature comming? is it here and i missed it?

    Thanks
    Kyle

  2. #2
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default

    can you find out the pid # they are changing
    efi live might be able to add it
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  3. #3
    Member O1Z06's Avatar
    Join Date
    Jan 2011
    Posts
    77

    Default

    Not sure but you could get around this temporarily and bypass with a screw in IAT. I run SD and have one and it works perfect.
    2001 Z06 512K Road Runner COS5
    LSx 427, Comp 7075 TT in progress

  4. #4
    Lifetime Member BLK02WS6's Avatar
    Join Date
    Jun 2005
    Posts
    442

    Default

    Hopefully EFILive will get it soon, because I absolutely hate when HPTuners has anything up on us... I hate HPT
    GM EFI Tuner
    02 WS6 9.41 @ 143 MPH 3675#, drag radials, pump gas, through the mufflers - sold


  5. #5
    Lifetime Member picnic_george's Avatar
    Join Date
    Jan 2007
    Posts
    212

    Default

    Quote Originally Posted by O1Z06 View Post
    Not sure but you could get around this temporarily and bypass with a screw in IAT. I run SD and have one and it works perfect.
    That's the easy way... But since that MAF has one already, it would be cool to use it.

  6. #6
    Junior Member
    Join Date
    Sep 2007
    Posts
    41

    Default

    I am running an Edelbrock e-force supercharger with a 2002 gen lll controller. The supercharger has a tmap sensor with the same scaling as the ls3 iat sensor. It would be wery nice if someone could make a cax file that made it possible to scale the iat sensor on this controller.

  7. #7
    Senior Member
    Join Date
    Jan 2013
    Posts
    150

    Default

    Has EFILive come out with the ability to adjust the IAT scalar yet?

    Running a Ling. MAF and trying to get the proper IATs to show.

    Otherwise I guess I'm stuck with a seperate IAT sensor

  8. #8
    Lifetime Member picnic_george's Avatar
    Join Date
    Jan 2007
    Posts
    212

    Default

    Not that I know of, it would be cool to have it added.....


    Like really cool. HINT HINT lol

  9. #9
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Some other LS1 additions are being added so it is probably a good time for us to revisit this while we are there, no time frame though, it's just on the list ok.
    I no longer monitor the forum, please either post your question or create a support ticket.

  10. #10
    Member
    Join Date
    Feb 2009
    Posts
    76

    Thumbs up

    Quote Originally Posted by GMPX View Post
    Some other LS1 additions are being added so it is probably a good time for us to revisit this while we are there, no time frame though, it's just on the list ok.
    Would be great to have this feature.

    Brad

    99 Firebird Formula, M6, LS6 intake, headers, catback, lid, BRE cam.

    EFI V2, V7.5.5 (Build 149)
    V8.1.2 (Build 142)
    Boot Block 2.07.01 Oct 14, 2010
    Firmware 2.07.05 Jan 29, 2011
    LC-1 with serial cable
    COS 5

Page 1 of 2 12 LastLast

Similar Threads

  1. 5 wire maf/iat sensor
    By vcls1 in forum Gen IV V8 Specific
    Replies: 6
    Last Post: May 7th, 2012, 12:27 PM
  2. How important is IAT sensor placement
    By samh_08 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: May 13th, 2009, 11:16 AM
  3. IAT Sensor when MAF bypassed
    By Robbie The Wrench in forum Gen III V8 Specific
    Replies: 9
    Last Post: August 16th, 2008, 07:33 AM
  4. IAT sensor
    By Chevy366 in forum Lounge
    Replies: 6
    Last Post: August 3rd, 2007, 10:49 AM
  5. Separate IAT sensor install
    By mtnman in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: November 18th, 2005, 02:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •