Results 1 to 9 of 9

Thread: 2000 s10 2.2 can not delete codes

  1. #1
    Junior Member
    Join Date
    Apr 2012
    Posts
    18

    Default 2000 s10 2.2 can not delete codes

    I have a 2000 s10 that is setting a p0452 and a p0453. I have deleted them in the tune but they continue to set anyway. Any ideas?

  2. #2
    New Member
    Join Date
    Jan 2010
    Posts
    1

    Default

    Im having the same problem. I have removed the codes in the tune but i still keep getting a MIL light. Ive reflashed it several times and have the lastest updates. Any ideas? or is there another OS i can use?

  3. #3
    Lifetime Member
    Join Date
    May 2010
    Posts
    507

    Default

    Sorry to say this has been a horse that has been beat to a pulp. Unfortunate.
    Last edited by slows10; November 14th, 2012 at 11:39 AM.
    1997 S10, 06 trailblazer SS LS2 swap, 4L70E trans, 76mm turbo. Factory ZQ8 suspension. 3.08, G80 w/a zexel. With a 0411 swap.

  4. #4
    Lifetime Member Boost's Avatar
    Join Date
    Dec 2006
    Posts
    1,473

    Default

    So what are the main issues with tuning these, as I have to do one soon?
    '01 Z28 LS1 / T56
    7.59 @ 94.45 (1/8 mile)
    YouTube channel
    '02 C1500 L59 / 4L60E
    8.24 @ 85.08 (1/8 mile)
    www.lsxnos.com

  5. #5
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,346

    Default

    List what os you are having issues with and i will address them shortly. Some starting points may be a bit off which is the reason for them not turning off correctly. The layout changes in them on some even though the operating systems are close, so i have to just rename them and the order on some. Easy fix, but time consuming since there are over 200 now supported.....
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  6. #6
    Lifetime Member Boost's Avatar
    Join Date
    Dec 2006
    Posts
    1,473

    Default

    You are the man Jesse!
    '01 Z28 LS1 / T56
    7.59 @ 94.45 (1/8 mile)
    YouTube channel
    '02 C1500 L59 / 4L60E
    8.24 @ 85.08 (1/8 mile)
    www.lsxnos.com

  7. #7
    Member
    Join Date
    Nov 2009
    Posts
    52

    Default

    I have just completed a conversion using a 1999 2.2 from an S10 - OS 09383061 and discovered that setting trouble codes to " Not Reported" doesn't cause them to not set. Is there a work around for this? I have access to another popular tuning suite, should I give that a try?

  8. #8
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,346

    Default

    I probably did not have the starting offset correct for part of it which is what caused the codes to not fully shut off. I never got around to fixing the few that where wrong due to efi dropping support on them.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  9. #9
    Member
    Join Date
    Nov 2009
    Posts
    52

    Default

    Ok, so there is no work around since the PCM is no longer supported?

Similar Threads

  1. 6.7L Throttle valve delete and egr delete
    By Killerram2500 in forum Cummins 6.7L
    Replies: 4
    Last Post: November 20th, 2012, 02:41 PM
  2. 99 S10 2.2 questions
    By gotabav in forum IL4, 97-01 PCM and 02+ P11 PCM
    Replies: 16
    Last Post: December 8th, 2011, 11:58 PM
  3. dpf delete = codes?
    By zackbennett in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: June 21st, 2009, 05:39 AM
  4. '03 Express van 6.0L in '00 S10
    By Sherk in forum Gen III V8 Specific
    Replies: 1
    Last Post: June 5th, 2008, 05:46 PM
  5. 99 S10 with 4 banger
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 17
    Last Post: June 5th, 2006, 01:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •