Results 1 to 8 of 8

Thread: It's been a while since I used flash scan

  1. #1
    Junior Member billyjo's Avatar
    Join Date
    Oct 2006
    Posts
    47

    Default It's been a while since I used flash scan

    It's been several years since I used my EFI software, I downloaded the latest software and plugged in my V1 cable into my Z06. I opened the scanner tutorial and started reading through the tutorial. I made the connection to the car but when I tried to pull up the DTC codes that option wasn't available. I'm guessing even though it says that I am connected I'm not. Can someone point me in the right direction? I don't want to tune it just scan it.

    Thanks,

    Bill
    72 K/5 4x4 Blazer, Radixed LQ4 with 3.2 pulley, WCCH 90mm TB, LPE GT2-3 cam, Stainless Works Headers, NV4500 5 speed, 14 bolt FF rear, Dana 60 front, 4.56 gears, detroit lockers, 4 wheel discs, Hydro brakes, full autometer gauges and more....



  2. #2
    Junior Member billyjo's Avatar
    Join Date
    Oct 2006
    Posts
    47

    Default

    This morning I tried reading the PCM and here is the error message I got:

    Click image for larger version. 

Name:	Capture.PNG 
Views:	162 
Size:	37.4 KB 
ID:	13874
    72 K/5 4x4 Blazer, Radixed LQ4 with 3.2 pulley, WCCH 90mm TB, LPE GT2-3 cam, Stainless Works Headers, NV4500 5 speed, 14 bolt FF rear, Dana 60 front, 4.56 gears, detroit lockers, 4 wheel discs, Hydro brakes, full autometer gauges and more....



  3. #3
    Junior Member billyjo's Avatar
    Join Date
    Oct 2006
    Posts
    47

    Default

    This morning I tried reading the PCM and here is the error message I got:

    Click image for larger version. 

Name:	Capture.PNG 
Views:	162 
Size:	37.4 KB 
ID:	13874

    Then this:

    Click image for larger version. 

Name:	Capture1.PNG 
Views:	143 
Size:	155.0 KB 
ID:	13875

    Any advise on what to try next?
    72 K/5 4x4 Blazer, Radixed LQ4 with 3.2 pulley, WCCH 90mm TB, LPE GT2-3 cam, Stainless Works Headers, NV4500 5 speed, 14 bolt FF rear, Dana 60 front, 4.56 gears, detroit lockers, 4 wheel discs, Hydro brakes, full autometer gauges and more....



  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,189

    Default

    What year is your Z06...?

    Did it come with an LS6 or an LS7...?


    If it came with an LS6, then it has an LS1B controller (i.e. GenIII LS1B 1999-2008);

    otherwise if came with an LS7, then it has an E38 controller which V1 can't read.

  5. #5
    Junior Member billyjo's Avatar
    Join Date
    Oct 2006
    Posts
    47

    Default

    I guess that explains it...2011 Z06 LS7. I guess that means I have to upgrade?
    72 K/5 4x4 Blazer, Radixed LQ4 with 3.2 pulley, WCCH 90mm TB, LPE GT2-3 cam, Stainless Works Headers, NV4500 5 speed, 14 bolt FF rear, Dana 60 front, 4.56 gears, detroit lockers, 4 wheel discs, Hydro brakes, full autometer gauges and more....



  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,189

    Default

    Yes you would need a V2 for your 2011 Z06.

  7. #7
    Junior Member billyjo's Avatar
    Join Date
    Oct 2006
    Posts
    47

    Default

    I need the V2 even if all I want to do is scan and data log?
    72 K/5 4x4 Blazer, Radixed LQ4 with 3.2 pulley, WCCH 90mm TB, LPE GT2-3 cam, Stainless Works Headers, NV4500 5 speed, 14 bolt FF rear, Dana 60 front, 4.56 gears, detroit lockers, 4 wheel discs, Hydro brakes, full autometer gauges and more....



  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,189

    Default

    Yes, because the OBD2 serial protocol changed from VPW to CAN in 2005/2006.

Similar Threads

  1. How much does the flash scan v2 weigh?
    By TheSignGuy in forum Lounge
    Replies: 7
    Last Post: October 11th, 2011, 12:44 PM
  2. flash scan for gauges
    By crash85 in forum FlashScan V2 BB Logging
    Replies: 35
    Last Post: November 26th, 2010, 07:24 AM
  3. Flash Scan V2 problems
    By loafycleetus in forum FlashScan V2
    Replies: 4
    Last Post: April 20th, 2009, 01:51 AM
  4. Where is Flash Scan update 2.04.57?
    By Spindoctor in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: February 6th, 2008, 12:49 PM
  5. Flash scan + efilive 7.0
    By 2000ssnb in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: November 21st, 2004, 10:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •