anyone know how I would go about this? or am I forced to buy a locked TCM? I doubt a simple OS re-flash would do it.
Yes I have a valve body.
anyone know how I would go about this? or am I forced to buy a locked TCM? I doubt a simple OS re-flash would do it.
Yes I have a valve body.
If you have a 01-05 DURAMAX truck with a 5 speed and want to make it a 6 speed, you are pretty well limited to the SUNCOAST kit. The 6 speed valve body will not just drop into a 5 speed and then have a 6 speed OS flashed in(tried this). You have to use the 5 speed style solonoids which means you have to run the kit. And if it is a 01-05 truck, there is no factory or ALLISON flash to enable 6th gear. If you have an 06-07 MD with a 5 speed, then yes it can be flashed to a 6 speed by ALLISON, or if you have a 8.1L you can swap in an 06 TCM, 6 speed valve body, modify the wiring harness, and have a 6 speed.
1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.
I have been considering purchase of a 2006 Topkick 4500 4x4 engine decodes as an LLY and guy says trans is a 5 speed you mentioned that 2006 MD can be flashed to enable use as a 6 speed who do I need to contact or what needs to be done to have this update done when or fi the get the truck
Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
Custom Tuning Services
DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
EFILive's first VGT "Software Wastegate Tune"
sent you an email for 6 spd TCM on my lly.
Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
Custom Tuning Services
DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
EFILive's first VGT "Software Wastegate Tune"
Hmmm...OK... I get what you are saying about the solenoids, makes sense.
It's an 02. Access to various VBs is not an issue, but, without that software for the G solenoid, I'm SOL...
The G solenoid has nothing to do with the 6 speed as the SUNCOAST 5-6 speed kit doesn't use it(but they do use a G solenoid type valve body). The problem is having the 6th gear pipe installed in the valve body which means you have to start with a 04-05 5 speed valve body to be able to install one. Then you have to have the software to command the extra shift of the C2 and C4 clutch pack for 6th gear. ALLISON has the TCM OS, but they won't pass it up and I doubt it is even on there servers for download if you had access to the ALLISON DOC. For an 01-05 to get 6th gear, your only option is the SUNCOATS kit if you want everything to work like stock(some have installed a GEN IV 6 speed TCM and made the other changes, but it still won't work as designed as the GEN IV TCM will be working in default mode without receiving the GM high speed can bus data protocol messages from the BOSCH ECM). I looked into this myself last year(even bought the 6 speed valve body and associated components) to only find out the software was a hurdle not easily overcome.
1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.
what about the cost (suncoast kit) vs the benefits? is it worth it? do you get that much better MPGs????
2008 Chevrolet 3500HD DRW LTZ
285/75/17 Nitto Dura Grapplers, 4.56 gears, Front and rear ARB lockers, Efi Live tuning by me, Raptor 160 LP, Cognito 4-6 NTB Lift, 4" Exhaust, Built Trans by Mike L.
Sold - 2004 LB7 Duramax, EFI Live with DSP5 Tune
stage 4 SC transmission, 265/70/16 tires