Results 1 to 2 of 2

Thread: Anyway to unlock tunes?

  1. #1
    Lifetime Member
    Join Date
    Oct 2010
    Posts
    321

    Default Anyway to unlock tunes?

    I know this will probably start an uproar again but one way I've learned to tune was to buy tunes and study them, make changes and learn. I bought a tune and it's locked to the tuners tuner (I understand why) but now i cannot even study the tune and learn from it. Is there anyway to unlock it so I can look and study and make changes so I don't have to send it back to him everytime i want a change? Thanks.

  2. #2
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    No. this is done specifically so others can't see what was done and learn from there hundreds of hours of work. Many tuners can put 40-50 hours into a tune, and this is after doing this SEVERAL times to get to where they're at. And by leaving it unlocked they are potentially losing sales, so I can't blame them for keeping them locked. I give out alot of tunes, but I do this as a hobby. But there are still some tunes I have 50-60 hours in i DON'T give out because of how much work went into them.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

Similar Threads

  1. Converting DSP2 tunes to DSP5 Tunes
    By BlkMax in forum Duramax LB7
    Replies: 4
    Last Post: March 6th, 2009, 10:14 AM
  2. How can I unlock a PCM
    By imtduncan in forum Gen III V8 Specific
    Replies: 43
    Last Post: February 19th, 2009, 08:12 PM
  3. Can't unlock pcm
    By red12secz28 in forum Duramax LB7
    Replies: 7
    Last Post: November 30th, 2007, 02:29 AM
  4. Unlock the PCM
    By ASSAMI in forum RoadRunner Real-Time PCM Emulator
    Replies: 5
    Last Post: February 15th, 2007, 05:49 AM
  5. Would unlocked tunes encourage you to pay for more tunes?
    By ringram in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: November 11th, 2005, 01:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •