Results 1 to 3 of 3

Thread: calibration problem

  1. #1
    Junior Member crazycumminz's Avatar
    Join Date
    Sep 2012

    Default calibration problem

    just bought efi live for my 06' 5.9l, this is all new to me.installed software, did the read, and on calibration down at bottom of page has three things with triangle and ! saying enabled. i have no tune yet, is this the problem? it reads my vin, ecm/CM849, CMB, calibration ID 35325553AS, pls some help? try to do a cal- flash CMB no supported?

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003


    If possible can you post a photo of the screen?

  3. #3
    Lifetime Member anarchydiesel's Avatar
    Join Date
    Jun 2011


    You have to full flash the cummins controllers, if you have errors on the calibration screen of the tune then your tune file is likely corrupt. If it says "incomplete do not flash" it likely has had a bullydog on it and a new file will be needed.

    Anarchy Diesel Tuning/ Advanced Injection Diesel Technologies
    EFI Live Cummins Beta Tester
    Duramax and Cummins Tuning

Similar Threads

  1. Calibration or OS?
    By dsltnr in forum Cummins 5.9L
    Replies: 2
    Last Post: September 22nd, 2012, 09:57 PM
  2. Help with locked calibration
    By Fred007 in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: September 10th, 2010, 07:10 AM
  3. Problem with free air calibration on LC-1
    By MyM8V8 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 20th, 2010, 08:15 PM
  4. PID Problem w/BBB - Asked by Cougar 281 (FRPDES problem)
    By Jasondt2001 in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: March 23rd, 2008, 01:02 PM
  5. Speedo Calibration
    By Mark Barber in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: September 3rd, 2005, 01:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts