Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Truck was running fine now getting these codes?

  1. #11
    Member
    Join Date
    Apr 2011
    Posts
    63

    Default

    Quote Originally Posted by joecar View Post
    Log shows it's close...

    at PT the PLX says its a little leaner than stoich while the LTFT's say it's a little richer... (after the PCM applies the trims the wideband should say it's stoich)...

    narrowbands are swing a little slow (1-2 times per second vs 3-5 times per second);

    what fuel are you running...?
    93 oct. and Narrowbands are like a day 4 days old when I did that log. Electrical problem maybe?

  2. #12
    Member
    Join Date
    Apr 2011
    Posts
    63

    Default

    Well made all those changes that you said and I still have the same issues p0135 and p0155 and p0102(I know this one has to be set)
    ?

  3. #13
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Something is wrong with the NBO2... we need a troubleshooting chart from the Service Manual, what year/model/vehicle is this...?

  4. #14
    Member
    Join Date
    Apr 2011
    Posts
    63

    Default

    04 two wheel drive auto silverado 5.3.

  5. #15
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'll look it up...


    but in the meantime, here is some info (base on F-car):
    P0135
    P0155

  6. #16
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Might be due to long tube headers losing heat ahead of the O2 sensors...

  7. #17
    Member
    Join Date
    Apr 2011
    Posts
    63

    Default

    Why did it just start doing it now. for 6 years on maf and long tubes cam and heads never got a code. Now only change is 2bar map and FAST LSXRT intake. and CLSD tune. Just doesn't add up or exhaust leak maybe?

Page 2 of 2 FirstFirst 12

Similar Threads

  1. RTACS fine/coursse control
    By tazinhawaii in forum RoadRunner Real-Time PCM Emulator
    Replies: 1
    Last Post: April 8th, 2007, 11:40 AM
  2. Fine tuning AFR in PE
    By 12sec.5.3 in forum General (Petrol, Gas, Ethanol)
    Replies: 28
    Last Post: October 25th, 2006, 03:08 PM
  3. Idles fine till I turn on AC
    By skippy in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 8th, 2006, 04:02 AM
  4. Will V3 custom OS throw P103 codes when running mafless?
    By hpcubed in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: November 29th, 2005, 09:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •