can't find PID's for LC-1 on V2.

[rumblebox]

all these tutorials are for V1, so i'm absolutely lost on which PID's to get my wideband to read.

i did a search with no helpful results.

i'm using an adapter from the serial OUT to the ethernet cable IN on the black box. and yes i have the terminator plug in the serial IN cable.

[joecar]

Read this (post #1 contains calc_pid.txt file you need): A-New-Twist-on-CALC-VE-Table-Computing-the-Entire-VE-Table


What year/model/vehicle do you have (sorry, I keep forgetting what people have)...?

[joecar]

Do you have your LC-1 connected to your V2 like this:


LC-1 SERIAL IN <-- terminator plug
LC-1 SERIAL OUT --> null modem cable --> V2 RJ12


( null modem cable = Rx and Tx signal swapped at one end )