Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Rough hot idle but smooth cold start

  1. #21
    Member
    Join Date
    Jun 2008
    Posts
    54

    Default

    Hi Joe,
    after driving with the new tune that included your suggested improvements for a couple of days, I have to say that the rocking and roughness at idle is greatly reduced and the car drives very nice.
    Thanks a lot! It was not much that I changed but it were definitely the right things.
    Thanks
    Alex

  2. #22
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hi Alex, good to hear.


    One thing to note: if you're running MAF-less make sure that a MAF DTC code is present (this is how the PCM knows to use VE instead of MAF).

Page 3 of 3 FirstFirst 123

Similar Threads

  1. truck revs to 3000 rpm on cold start for 5 seconds then back to idle.
    By hemi_power_3@hotmail.com in forum Gen III V8 Specific
    Replies: 3
    Last Post: September 3rd, 2012, 02:22 PM
  2. EGR Deleted 6.7L Runs very rough when cold
    By Mitco39 in forum Cummins 6.7L
    Replies: 18
    Last Post: March 29th, 2012, 05:27 PM
  3. Cold start great but warm start sucks."Idle
    By mvvette97 in forum Gen III V8 Specific
    Replies: 11
    Last Post: October 26th, 2008, 12:22 AM
  4. rough idle at start up with cam
    By achidotcom in forum Vortec V6/V8 Specific
    Replies: 9
    Last Post: April 19th, 2008, 03:12 PM
  5. Cold start idle help
    By oztracktuning in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: May 25th, 2006, 08:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •