Results 1 to 3 of 3

Thread: Auto trans and Dyno

  1. #1
    Senior Member
    Join Date
    Aug 2012
    Posts
    110

    Default Auto trans and Dyno

    I know I have asked a lot of questions lately as I been figuring out GM and EFI Live. I come from the Japanese and European import world and slowly been picking up this GM tuning. Most of the cars I have done have all been manual trans. I have a question about doing a full pull (wot) on our dyno with a auto car. Another shop i worked for used HP Tuners and would get the car to 3rd gear then lock it in 3rd.

    I just want to be sure of this.
    1. run through the gears until in third gear.
    2. DVT (F12) and select Auto Transmission.
    3. Activate transmission gear control - Hold 3rd gear
    4. Do WOT pull.
    5. Rinse & Repeat!

  2. #2
    Member
    Join Date
    Jan 2015
    Posts
    74

    Default

    Quote Originally Posted by FreshDA9 View Post
    I know I have asked a lot of questions lately as I been figuring out GM and EFI Live. I come from the Japanese and European import world and slowly been picking up this GM tuning. Most of the cars I have done have all been manual trans. I have a question about doing a full pull (wot) on our dyno with a auto car. Another shop i worked for used HP Tuners and would get the car to 3rd gear then lock it in 3rd.

    I just want to be sure of this.
    1. run through the gears until in third gear.
    2. DVT (F12) and select Auto Transmission.
    3. Activate transmission gear control - Hold 3rd gear
    4. Do WOT pull.
    5. Rinse & Repeat!

    I know its an old post but I am now able to use a dyno and trying to get some info.

    Did this procedure work for you?

    How are you guys doing it for LML?, is it the same?
    08 LMM CC Dually

    Canada

  3. #3
    Lifetime Member Road's Avatar
    Join Date
    Feb 2015
    Posts
    336

    Default

    Good question I would like to hear what others are doing too. I do 4th gear pulls in tow haul and start the run little over 2000 rpm or what ever it takes to keep from down shifting. What really sucks is a Cummins auto...

Similar Threads

  1. Auto VE or Calc VET or Auto Maf?!?!
    By Nver2loud in forum Gen III V8 Specific
    Replies: 171
    Last Post: October 23rd, 2012, 04:08 AM
  2. Auto Trans tuning with 6.7L
    By TurboCamaro in forum Cummins 6.7L
    Replies: 4
    Last Post: October 19th, 2012, 01:58 AM
  3. Engine Trans Dyno Tuning Questions!
    By TBMSport in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: November 14th, 2009, 11:37 AM
  4. Dyno success on Dynolog Dyno
    By oztracktuning in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: April 1st, 2006, 11:31 PM
  5. Auto Trans & Mafless
    By johnv in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 10
    Last Post: August 25th, 2005, 08:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •