I know I have asked a lot of questions lately as I been figuring out GM and EFI Live. I come from the Japanese and European import world and slowly been picking up this GM tuning. Most of the cars I have done have all been manual trans. I have a question about doing a full pull (wot) on our dyno with a auto car. Another shop i worked for used HP Tuners and would get the car to 3rd gear then lock it in 3rd.

I just want to be sure of this.
1. run through the gears until in third gear.
2. DVT (F12) and select Auto Transmission.
3. Activate transmission gear control - Hold 3rd gear
4. Do WOT pull.
5. Rinse & Repeat!