i set up the scan tool exactly like the AutoVE tutorial says, except instead of using "base efficiency numerator", i use "external wideband"?
i set up the scan tool exactly like the AutoVE tutorial says, except instead of using "base efficiency numerator", i use "external wideband"?
| 2000 firebird | LQ4 | LS3 top end | 226/231 .600 .602 114 | TCI 3500 | 3" x-pipe under-axle | BMR everything |
Use the pid CALC.WO2BEN
it is defined in the calc_pids.txt file located in post #1 of this thread: A-New-Twist-on-CALC-VE-Table-Computing-the-Entire-VE-Table
Also, do not set your B3618 PE table to stoich (EQR 1.00).