Results 1 to 2 of 2

Thread: E38 ECM 12V Power Consumption on the Bench

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Nov 2012
    Posts
    3

    Default E38 ECM 12V Power Consumption on the Bench

    In case anybody can use the info, I just powered up an E38 ECM standalone on the bench (nothing attached) and measured the 12VDC input current. The 12V B+ input (J1 pin 20) pulls about 140ma and the switched 12V inputs (J1 pins 19 and 47) together pull another 10ma. I'm using a 12VDC 1.25A plug-in power supply and it seems to be able to power this ECM standalone no problem.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Thanks for the info

Similar Threads

  1. How much power needed for bench top programing?
    By kbracing96 in forum Tutorials
    Replies: 10
    Last Post: August 28th, 2010, 08:59 AM
  2. Bench tuning power source
    By killerbee in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: April 10th, 2009, 12:33 PM
  3. bench harness for ls2 and e38
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: March 29th, 2007, 12:39 PM
  4. E38 (06 Ls2) Bench Harness Diagram-help?!
    By Chuck CoW in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 15th, 2006, 10:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •