Works good with 7.5 ?
Works good with 7.5 ?
2002 GMC 2500HD 4x4 SCLB STOCK MOTOR WITH TOMAN TUNING,FASS 150, M/A TRANS,11.90 ON A GOOD DAY IT'S MY WORK TRUCK,19 TO 21 MPG WITH ME DRIVING,THE TRUCK (OLD RED )HAS 909,000 MILE AND LOVING IT,285/75/16
The V7 and V8 software cannot share a connection to the FlashScan device. If the V7 Scan or V7 Tune software is connected to the FlashScan device then V8 will not be able to connect to the FlashScan device.
Make sure V7 is not running* when you try and connect using the V8 software.
* Or at least that the V7 Scan Tool is disconnected and the V7 Tune Tool is not displaying any Read/Flash/Lock/PCM Info window.
Regards
Paul
Before asking for help, please read this.
Still not working,wow 2 day to try to get it going,do I need to uninstall 7,what the hell
2002 GMC 2500HD 4x4 SCLB STOCK MOTOR WITH TOMAN TUNING,FASS 150, M/A TRANS,11.90 ON A GOOD DAY IT'S MY WORK TRUCK,19 TO 21 MPG WITH ME DRIVING,THE TRUCK (OLD RED )HAS 909,000 MILE AND LOVING IT,285/75/16
Ok, let's go step-by-step...
what firmware version is in your V2...?
How do I find it ?
2002 GMC 2500HD 4x4 SCLB STOCK MOTOR WITH TOMAN TUNING,FASS 150, M/A TRANS,11.90 ON A GOOD DAY IT'S MY WORK TRUCK,19 TO 21 MPG WITH ME DRIVING,THE TRUCK (OLD RED )HAS 909,000 MILE AND LOVING IT,285/75/16
2.4.70
2002 GMC 2500HD 4x4 SCLB STOCK MOTOR WITH TOMAN TUNING,FASS 150, M/A TRANS,11.90 ON A GOOD DAY IT'S MY WORK TRUCK,19 TO 21 MPG WITH ME DRIVING,THE TRUCK (OLD RED )HAS 909,000 MILE AND LOVING IT,285/75/16
Before asking for help, please read this.
Sorry, I didn't see that reply. EFILive V8 will not work with a device with firmware that old.
You'll need to upgrade your firmware to V2.07.35. To do that, please read the document that can be found at:
Start->All Programs EFILive->V8->Documents->Upgrading FlashScan.
The most important thing to get right during the upgrade process is to make sure you get the firmware to exactly V2.04.72 before attempting to upgrade the boot block.
If you attempt a boot block upgrade when the firmware is V2.04.70 (like yours is now) or V2.04.71 then chances are the V2 will become unresponsive and you'll need to return it to EFILive to be reset.
The document explains the steps you need to take in more detail, please follow it carefully.
Regards
Paul
Before asking for help, please read this.
OK but this is killing me,I have so much in my V2 that I do not want to try this,in this area I have had to set up at lest 10 computers with EFI,it is at time so hard to work with EFI for others and now me ? ,I like EFI a lot WOW
2002 GMC 2500HD 4x4 SCLB STOCK MOTOR WITH TOMAN TUNING,FASS 150, M/A TRANS,11.90 ON A GOOD DAY IT'S MY WORK TRUCK,19 TO 21 MPG WITH ME DRIVING,THE TRUCK (OLD RED )HAS 909,000 MILE AND LOVING IT,285/75/16
Unless you upgrade your FlashScan firmware you will not be able to use EFILive V8. Its not a difficult process to upgrade. But there are a couple of traps that can cause a problem.
If you don't follow the instructions exactly, the worst case scenario means sending your device back to EFILive. You won't lose anything from your V2, we just have to reset the firmware here.
Regards
Paul
Before asking for help, please read this.