Results 1 to 10 of 29

Thread: 06 Vette, LS2, 440 CI, Auto, 500 RWHP, Fast 102, big cam, ported heads - Cold Idle

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #3
    Member
    Join Date
    Nov 2012
    Posts
    62

    Default

    06 C6 A6 Engine Post Gary Runs good cold start needs help.ctd06 C6 A6 Engine Post Gary Runs good cold start needs help.ctd
    Quote Originally Posted by swingtan View Post
    As a test, remove the FAST manifold and return it to stock. Then see how it idles......

    Also, post the tune file and some logs of the problem.

    Simon.
    Well removing the intake is quite a chore and not really practical since I have to put it right back on. Are you saying that because you feel it might have a vacuum leak?

    Here is the file. I don't have the logs handy but I can tell you that when cold the car starts, flares, drops down to about 500 RPM, revs once or twice and then dies. On the second try it is a bit harder to start (cranks longer) but does the same basic thing. If I give it just a bit of throttle it will idle smooth at about 1200. If I let off it drops down, revs up once or twice then dies. I will log it and post logs tomorrow. Thank you for the help.

    Attachment 14186
    Last edited by RD in SD; November 17th, 2012 at 03:50 PM.

Similar Threads

  1. changing ls2 90 to fast ls2 102
    By evilperformance in forum Gen IV V8 Specific
    Replies: 13
    Last Post: November 25th, 2012, 01:23 PM
  2. 00 gm 5.3 cam heads wont idle in gear.
    By eigerman8909 in forum Gen III V8 Specific
    Replies: 3
    Last Post: March 28th, 2012, 09:36 AM
  3. High MAP after heads and cam at IDLE
    By maudyZ28 in forum Gen III V8 Specific
    Replies: 13
    Last Post: August 17th, 2011, 03:05 AM
  4. Help please 2000 vette with big cam
    By nchristian in forum Gen III V8 Specific
    Replies: 8
    Last Post: January 14th, 2010, 05:15 PM
  5. 97 Vette big cam idle surge (first post to forum too )
    By oldvette in forum Gen III V8 Specific
    Replies: 11
    Last Post: September 5th, 2009, 07:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •