Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: no 3.8 support?

  1. #1
    Junior Member
    Join Date
    Mar 2007
    Posts
    46

    Default no 3.8 support?

    Unless im blind I dont see an 00 3.8 v6 supported. I want to do some crazy crap to my 00 impala. need to tune it to run a dry N2o system which is actually going to be another set of injectors firing CNG. Please dont tell me I have to go buy HP tooners when I already own EFI live
    1972 Chevy Blazer, Twin Turbo Duramax 6.6
    69 Maro TT 427 LSX, Wayne due Vett frnt sub,
    Lateral Dynamics 3 link rear, D 60,
    T56, 18X10' 18X12 Boze Forged Speedsters,
    13" wilwood 6 pot fronts 13" wilwood 4 pot rears,
    (all Still under construction)

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by Madspeed View Post
    Please dont tell me I have to go buy HP tooners when I already own EFI live
    In the immortal words of Maxwell Smart "I asked you not to tell me that".
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member
    Join Date
    Mar 2007
    Posts
    46

    Default

    EEEEK what a bummer another car I cant tune. Sigh!!!! lifes a beach I guess. see you from the dark side.
    Hmm Is thier another ecm I could substitute without to much issue? I can find all kinds of ecms in the junkyards here. Ive seen the newer malibus
    Last edited by Madspeed; November 19th, 2012 at 05:10 AM. Reason: addl info
    1972 Chevy Blazer, Twin Turbo Duramax 6.6
    69 Maro TT 427 LSX, Wayne due Vett frnt sub,
    Lateral Dynamics 3 link rear, D 60,
    T56, 18X10' 18X12 Boze Forged Speedsters,
    13" wilwood 6 pot fronts 13" wilwood 4 pot rears,
    (all Still under construction)

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I think TunerCat offers programming for those PCM's too.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    Someday, if Ross does write the bootloaders, and Paul sets up the software to handle the bins, and os identifications, then i will add in full support for them. They are busy guys though..... Cummins = 99.9999% of time. the rest is sleep....
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    We should talk again Jesse if you are willing , with the changes we had to make to the software to support Cummins, a lot of what was going to be difficult for the 3800 PCM is now in place to expand on.
    Let me know when you pick up a GTP.
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    lol i can buy 10 tommorrow if you would like! arent they like 500 bucks a piece now??
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  8. #8
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    Looking thru, i think i have them close to being done to match the ls1 templates? I must have done it 5 years ago it looks like????
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  9. #9
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    If 30 people show interest in this thread, Ill finish them up.
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  10. #10
    Senior Member
    Join Date
    Nov 2007
    Posts
    188

    Default

    Pretty sure the read bootloaders are already written. See here http://forum.efilive.com/showthread....=v6+bootloader

Page 1 of 5 123 ... LastLast

Similar Threads

  1. OBDI support?
    By 1BadAction in forum FlashScan V2
    Replies: 4
    Last Post: April 28th, 2009, 12:44 AM
  2. 2009 OS support
    By PSWired in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 0
    Last Post: February 6th, 2009, 07:19 AM
  3. Northstar support?
    By KAZ MotorSports in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: November 16th, 2007, 11:05 AM
  4. CAN support?
    By QUICKSILVER2002 in forum General
    Replies: 5
    Last Post: April 27th, 2005, 10:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •