Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: Trouble loading Files

  1. #1
    Junior Member
    Join Date
    Nov 2012
    Posts
    24

    Default Trouble loading Files

    I have been trying to load a stock file back on a truck that we have previously tuned. It keeps throwing boot loader errors and then says its not lisc to my controller. Im the only one that has ever touched this truck. I have loaded the latest updates.

    Any ideas as what could be the problem?

    Thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Are you trying to flash using which one of these:
    - V7 tunetool
    - V8 S&T
    - V2 BBx

    Which year/model/vehicle...?

    What:
    - V7 build version...?
    - V8 build version...?
    - V2 firmware version...?

  3. #3
    Junior Member
    Join Date
    Nov 2012
    Posts
    24

    Default

    01 chevy dmax. tried v7.5 and v8. I have my v2 at the latest software version.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by 00f3fiddy View Post
    01 chevy dmax. tried v7.5 and v8. I have my v2 at the latest software version.
    Do you have these versions:

    V7 build 211
    V8 build 203
    V2 firmware 2.07.35

  5. #5
    Junior Member
    Join Date
    Nov 2012
    Posts
    24

    Default

    Im good on the v8 and v7. How do I check the firmware on my v2?

  6. #6
    Junior Member
    Join Date
    Nov 2012
    Posts
    24

    Default

    Found it.. Im at the 2.07.35! It has been working on other trucks just wont let me do this one particular truck.

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You see the bootloader/license error when you try flashing from V7 and from V8...?

  8. #8
    Junior Member
    Join Date
    Nov 2012
    Posts
    24

    Default

    Yes. I have tried flashing the stock file back in using both. I clicked the both that says something like it will take longer to load but it still doesnt work. It pops up saying the truck is not lisc to my controller. My controller is the only one ever hooked to this truck!

    Thanks for your interest in helping with this. I really need to get this resolved! Luckily my customer has been very patient during this!

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    When it fails trying to flash the original file (that you read out) back into the PCM using V7, copy the text box and paste it here in this thread.

  10. #10
    Junior Member
    Join Date
    Nov 2012
    Posts
    24

    Default

    I found the notes where I had written it down.

    Bootloader Rejected
    Reason: Controller has returned to normal operation. Please retry the operation.

    After retrying,

    Data tranfer was interupted.
    Please wait 15 seconds before retrying the operation.
    If you're experiencing difficulty reflashing the ecm try unchecking the use High speed check box.

    I think when I tried it in V8 it popped up this warning message.
    E54 Full Flash Warning

    If a full flash procedure fails to complete DO NOT remove power from E54 pcm
    To recover full flash the pcm using 7.5 pass thru flash software.

    Hope this helps!

    Thanks again!

Page 1 of 3 123 LastLast

Similar Threads

  1. Loading Original Files
    By Dik in forum AutoCal
    Replies: 3
    Last Post: August 7th, 2012, 10:24 AM
  2. Trouble loading pid selection to BB
    By Picto in forum Black Box Logging
    Replies: 16
    Last Post: November 15th, 2010, 04:00 AM
  3. Trouble loading DSP5 Tune
    By Dmaxx 02 in forum Duramax LB7
    Replies: 6
    Last Post: September 14th, 2009, 06:12 PM
  4. Trouble loading 2002 OS in 1999 PCM
    By Beer99C5 in forum Custom Operating Systems
    Replies: 36
    Last Post: October 9th, 2007, 04:20 AM
  5. Trouble loading V7.31 after system reinstall.
    By johnv in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 5th, 2006, 07:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •