Page 1 of 6 123 ... LastLast
Results 1 to 10 of 57

Thread: Help with CalcVE Tuning Filter

  1. #1
    Senior Member jeff keyuk's Avatar
    Join Date
    Jun 2008
    Posts
    127

    Default Help with CalcVE Tuning Filter

    Looking to build a Filter for CalcVE {B0101} Map and {B5001} Map or maps?? The following is a filter I have started and would it be correct???


  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hi Jeff, use this one (it should already be in the Name pulldown):


    (note that it says "Include data frames")
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	ben filter.png 
Views:	348 
Size:	28.3 KB 
ID:	13975  

  3. #3
    Senior Member jeff keyuk's Avatar
    Join Date
    Jun 2008
    Posts
    127

    Default

    thank joe! I thought so! Just what do make sure.That's the same filter I used for Auto VE.Table So you use this filter for all the calc VE Tables.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yes, that's correct, filtering is the same for any of the tuning procedures.

  5. #5
    Senior Member jeff keyuk's Avatar
    Join Date
    Jun 2008
    Posts
    127

    Default

    Hey Joe! Couple of question! In on making a B0101 Map it say on the [Data]Tap to select the Calc VE from the Parameter drop down list,
    There are 4- to pick from
    1 Calculated VE,ben correct(%)
    2 Calculated VE,Ben correct (g*K/kpa)
    3-calcuated VE,not corect(%)
    4-calculated VE,not correct(g*K/kpa)
    I had select # 2 Then on the "Filter". On the last line you said to apply (GM.FTC cell) is not equel to 21.00 cell.) This is not in on my Parameter Drop down list !
    Do I really need it. Thanks Jeff!

  6. #6
    Senior Member jeff keyuk's Avatar
    Join Date
    Jun 2008
    Posts
    127

    Default

    Oh Yea! After doing all that, I when't out and did a logging, Everything looked ok! On the B0101 map ,click on the average button ,the cell count when't BLANK ??

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by jeff keyuk View Post
    Hey Joe! Couple of question! In on making a B0101 Map it say on the [Data]Tap to select the Calc VE from the Parameter drop down list,
    There are 4- to pick from
    1 Calculated VE,ben correct(%)
    2 Calculated VE,Ben correct (g*K/kpa)
    3-calcuated VE,not corect(%)
    4-calculated VE,not correct(g*K/kpa)
    I had select # 2 Then on the "Filter". On the last line you said to apply (GM.FTC cell) is not equel to 21.00 cell.) This is not in on my Parameter Drop down list !
    Do I really need it. Thanks Jeff!
    Yes, select CALC.VET ("calculated VE, corrected") g*K/kPa

    ( on the Data/Row/Col tabs, checkmark Show Names to see the pid names ).

    If you did not log GM.FTC, you can delete that line from the filter (since the line above it ("TP > 1%") covers this, so you don't really need it)

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by jeff keyuk View Post
    Oh Yea! After doing all that, I when't out and did a logging, Everything looked ok! On the B0101 map ,click on the average button ,the cell count when't BLANK ??
    Post a screenshot...

    the Average button will show the average values in each of the cells... in the map properties goto the Empty tab and check the Empty Cell value, make it lower.

  9. #9
    Senior Member jeff keyuk's Avatar
    Join Date
    Jun 2008
    Posts
    127

    Default

    Must be something Ive done wrong!
    URL=http://imageshack.us/photo/my-images/24/jeffsveb0101map.png/][/URL]

    Thanks Joe !

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    What did you set the Empty Cell count to...?

    Ok, now click on the average, and click on the apply filter button.

Page 1 of 6 123 ... LastLast

Similar Threads

  1. Auto VE Tuning Data Filter Question
    By jeff keyuk in forum Tutorials
    Replies: 24
    Last Post: August 17th, 2012, 11:27 AM
  2. filter setting
    By myws6formula in forum RoadRunner Real-Time PCM Emulator
    Replies: 35
    Last Post: April 22nd, 2012, 03:24 PM
  3. Closed Loop Filter- Tuning w/o WBo2
    By Crunkmaro in forum Gen III V8 Specific
    Replies: 4
    Last Post: August 6th, 2011, 12:02 PM
  4. Help with AutoVe and CalcVE tired last night.
    By pavetim in forum Gen III V8 Specific
    Replies: 8
    Last Post: December 18th, 2010, 11:49 AM
  5. CalcVE insanity check... duh?
    By Wolfie in forum Gen III V8 Specific
    Replies: 19
    Last Post: May 21st, 2010, 08:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •