Trouble loading Files

[00f3fiddy]

I have been trying to load a stock file back on a truck that we have previously tuned. It keeps throwing boot loader errors and then says its not lisc to my controller. Im the only one that has ever touched this truck. I have loaded the latest updates.

Any ideas as what could be the problem?

Thanks

[joecar]

Are you trying to flash using which one of these:
- V7 tunetool
- V8 S&T
- V2 BBx

Which year/model/vehicle...?

What:
- V7 build version...?
- V8 build version...?
- V2 firmware version...?

[00f3fiddy]

01 chevy dmax. tried v7.5 and v8. I have my v2 at the latest software version.

[joecar]

01 chevy dmax. tried v7.5 and v8. I have my v2 at the latest software version.

Do you have these versions:

V7 build 211
V8 build 203
V2 firmware 2.07.35

[00f3fiddy]

Im good on the v8 and v7. How do I check the firmware on my v2?

[00f3fiddy]

Found it.. Im at the 2.07.35! It has been working on other trucks just wont let me do this one particular truck.

[joecar]

You see the bootloader/license error when you try flashing from V7 and from V8...?

[00f3fiddy]

Yes. I have tried flashing the stock file back in using both. I clicked the both that says something like it will take longer to load but it still doesnt work. It pops up saying the truck is not lisc to my controller. My controller is the only one ever hooked to this truck!

Thanks for your interest in helping with this. I really need to get this resolved! Luckily my customer has been very patient during this!

[joecar]

When it fails trying to flash the original file (that you read out) back into the PCM using V7, copy the text box and paste it here in this thread.

[00f3fiddy]

I did uncheck the use high speed box. After that is when it comes up not lisc to my controller