Hello a first timer here, and trying things out and seem to have run into a problem.
So reading here and the manual, I thought I had done everything right.
On a previous session I validated my PIDS (the .vpl file exists)
Taking the default PIDs, I changed slightly the priority of the ECT to 2 after reading
in the manual about it not needing high priority.
Here's the file I saved prior to programming the flashscan.
[Parameters]
CALC.CYLAIR=1,17
CALC.INJDC1=1,18
CALC.INJDC2=1,19
GM.FTC=1,0
GM.HO2S11=1,1
GM.HO2S21=1,2
GM.IBPW1=1,3
GM.IBPW2=1,4
GM.KR=1,5
GM.MAFFREQ=1,6
SAE.ECT=2,20
SAE.FUELSYS=1,7
SAE.IAT=1,8
SAE.LONGFT1=1,9
SAE.LONGFT2=1,10
SAE.MAF=1,11
SAE.MAP=1,12
SAE.RPM=1,13
SAE.SPARKADV=1,14
SAE.TP=1,15
SAE.VSS=1,16
Programming the Flashscan I used all the defaults except changed the 'Max frames per log'
to zero (for unlimited)
So off I go for a ride, and pressed the start/stop data logging buttton, creating 4
separate logs. The log light comes on, everything seems to be working.
Get back, hook it up to my pc and bring the window "Retrieve black box log files" and see
that about 3/4 of the memory is used up. Yet the time and frame columns all show zeros.
Is this caused by detecting a DTC. My PCM constantly sets DTC P1416, so will this prevent
no more data being logged?
I click select all, and then retrieve.
The USB light on the flashscan lights up, transfer finishes under a minute.
I then try to do a playback but nothing happens. Am I still missing something?
BTW I'm driving a 2000 Camaro SS, and using FlashScan v7.1.8
Any help would be great.