DTC Calibrations and California Emissions readiness
The smog shop said my car is "not ready" for smog testing because he tapped into the OBDII port and went to the I/M emission sensor monitor screen and found the O2 sensor "Not Ready, the HO2 sensor "Not Ready" and the EVAP system "Not Ready" the EVAP will be addressed once I can get the HO2 sensor and O2 Sensors to the "Ready" status. Any help in the DTC calibrations field will help, I think...
Last edited by F16-GTO; January 27th, 2013 at 09:01 AM. Reason: mis-spelled the word field
Do you have those systems (O2, HO2, EVAP) physically present...?
Are there any DTC's present...?
You should really repair the systems if they have failed, then look at the I/M Drive Cycles in the Service Manual for getting the tests ready.
Posting Permissions
Reply With Quote