Once you have your V2 configured for your PCM (i.e. in V8 S&T, goto BBx, on Scan tab edit pidlists, on Tune tab edit PCM), you can use the V2 menu to select a pid list, and to start logging.
Once you have your V2 configured for your PCM (i.e. in V8 S&T, goto BBx, on Scan tab edit pidlists, on Tune tab edit PCM), you can use the V2 menu to select a pid list, and to start logging.
BTW: I would recommend updating the V7/V8 software to builds 222/215 from here: EFILive-RC-1-%28March-01-2013%29
and update the V2 firmware to newer 2.7.35 (same version number, but updated firmware)...
this has a fix for the analog logging error.
Here is my Options.txt specific for logging/flashing my LS1B (from V8 S&T->BBx->Scan): Options.txt
the file Options.txt is located in My Documents\EFILive\V8\Config.
Joe, thanks for all the great information on BBX logigng. I was still curious as to whether bbx can log calc.pids? My question was weather or not I could do calc.vet without datalogging using a laptop. In otherwords, will the data from bbx logging include calc.selbens and cal.vet map information?
-Shaun
1987 MAZDA RX-7 LS1 T56 | 1995 MAZDA RX-7 ST PORT BOLT ONS ADAPTRONIC PNP | 1994 MAZDA RX-7 TSP 416 LS3 T56 MAGNUM E40 ECM
BBL does not log calc pids... but when you view the log in the V7 scantool, you can select those calc pids (and save them into the log file)...
in fact, in the BBL config, you can name which calc pids you want to become selected when you later take the log to the V7 scantool...
in V8 S&T, goto BBx, goto Scan, look at the V7 button.
I see, so after logging the necessary pids and transferring the data to a PC I can re-plot the data with calc.pids selected which will pull the calculated data and display it on the map tables so I can tune via calc.vet?
-Shaun
1987 MAZDA RX-7 LS1 T56 | 1995 MAZDA RX-7 ST PORT BOLT ONS ADAPTRONIC PNP | 1994 MAZDA RX-7 TSP 416 LS3 T56 MAGNUM E40 ECM
Joe, I think you deleted my duplicate post which I edited, haha. In anycase I just wanted to clarify with you regarding your options.txt file, which btw is awsome and thanks, but is the calc.vm pidlist the pids I need for perform a calc.vet/maf? Because I also see a calc.ve and calc.maf but assumed that were specific and the vm was for both?
-Shaun
1987 MAZDA RX-7 LS1 T56 | 1995 MAZDA RX-7 ST PORT BOLT ONS ADAPTRONIC PNP | 1994 MAZDA RX-7 TSP 416 LS3 T56 MAGNUM E40 ECM