i need a STOCK FACTORY file for an 08!
i need an UNTOUCHED factory tune file for an 08 6.7 that someone may have backed up. im new to this so im not sure what info i may or may not need to know like PCM types or if the files are adaptable to my truck or not all i know is i have an 08 6.7 cummins 25000 Auto 4x4 short box.
EDIT: OS 11620807
Cal 62350435AZ
Last edited by C Murda; February 12th, 2013 at 12:57 PM.
If you haven't gotten one yet, send me your email address and I'll get one to ya.
07.5 Mega stock
00' EX-Cab MFI
PM sent
try the tune library www.tunefiledeopt.com
Cheers
Cindy
I have a couple as well if you can't find what you need. -Joe
2010 Dodge QCSB 6.7 Auto
how do i find out what OS my truck is on?? like which version ECM?
Last edited by C Murda; February 7th, 2013 at 02:45 PM.
i need a STOCK FACTORY file for an 08!
When you connect to the scan tool it will show you on the bottom of the screen next to your VIN
^^^ and just connecting before my truck is returned to a stock tune wont hurt anything right?
Yes, you're just reading the info from the PCM/ECM.Originally Posted by C Murda
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
ok i cant figure any of this out... im a noob. i even tried following EFI live for dummies and their other PDFs for "getting started" but what they show for images is all wrong compared to what i have and am using as far as the actual V2 hand held. all my software is loaded and ready i registered it with the supplied reg key i plug in my V2 to my OBD2 port then plug it in to my laptop and turn the key into the "run" position. i opened the Scan tool program and i click "connect" then a pop up window comes up asking to select controller.. i assume i select "flashscan/autocal only" ??? and check off the box for automatic since i am an auto?? then what? i get a list of things validated and then a "ready" but no information as to what OS my truck is in? im just lost..
on my V2 the main screen i get:
F1 scan tool
F2 tune tool
F3 diagnostics
F4 options
so i cant even use the PDF from efi live for guidance as they say its F1 select PIDs F2 scan tool F3 tune tool F4 options...
Last edited by C Murda; February 10th, 2013 at 08:12 AM.
Posting Permissions
Reply With Quote