Results 1 to 3 of 3

Thread: Keyless entry doesn't work with Flashscan unit connected

  1. #1
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    285

    Default Keyless entry doesn't work with Flashscan unit connected

    If I leave the truck with the Flashscan unit connected to the ODB port, the keyless entry doesn't work, it won't lock or unlock, the panic button doesn't work either. As soon as I unplug it it starts working just fine.

    Kind of annoying, but is this an issue?
    2001 Silverado 5.3L ECSB 2WD T56:
    T76 turbo, Meth injection, 72# injectors, 799 heads, 212/212 114LSA cam, Built 4L80E, 3.42's
    EFILive V1 Commercial, COS5 2-bar SOLSD, AEM wideband

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Keyless entry is a function of the BCM... when FlashScan is connected to the serial bus, any bus traffic would be altered, this may be confusing the BCM

    ( typically, I've seen the BCM's exhibit poor etiquette on the serial bus... if it fails to obtain the bus it throws a tantrum ).

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I haven't heard of this before. And if your V1 is just plugged in and not connected to a PC it wouldn't be sending any messages on the data bus, so it is a bit odd.
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. Connected Device Not Responding - Flashscan
    By DangerDog in forum FlashScan V2
    Replies: 4
    Last Post: September 1st, 2011, 06:15 PM
  2. VAT Relink doesn't work
    By samgm2 in forum FlashScan V2
    Replies: 2
    Last Post: July 27th, 2011, 01:04 PM
  3. Scan doesn't work after upgrade
    By ChucksZ06 in forum Gen III V8 Specific
    Replies: 12
    Last Post: June 2nd, 2009, 02:11 PM
  4. LC-1 doesn't work pass though
    By samh_08 in forum FlashScan V2
    Replies: 5
    Last Post: April 19th, 2009, 07:53 AM
  5. Replies: 15
    Last Post: April 14th, 2007, 06:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •