Results 1 to 2 of 2

Thread: Help Tuning For New Cylinder Heads

  1. #1
    New Member
    Join Date
    Sep 2012
    Posts
    2

    Question Help Tuning For New Cylinder Heads

    So I recently swapped the heads out on my ol' 5.3l and it's giving me some trouble adding fuel to it. I'm just a bit stumped about what all I'll need to change to get it running enough to get some logging done. I've started out by adding 30% to the VE Tables but the wideband keeps showing its running waaay lean. So I'd like some help in steering me in the right direction on tuning it. Any help is appreciated by this newbie.

    2003 Chevorlet Silverado 5.3l.tun
    2003 Chevorlet Silverado ECSB w/ Quadrasteer
    Current Mods:
    ProComp Cylinder Heads: Intake 205cc Valve 2.02"-Exhaust 80cc Valve 1.60" 62cc chambers
    Texas Speed 224r 224/224 .581"/.581" 112 lsa
    Pacesetter 1 3/4" LT
    3"offroad Y pipe w/ Custom 3" exhaust (in progress)

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    It is most likely running from the MAF... try increasing the MAF table by 5% and see what it does.

    Post some logs.

    General comments:
    set B3616 to 65% below 3200 rpm, and 35% above.
    set B3608 and B3609 to 0.01s.

Similar Threads

  1. Tuning after heads and cam install
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: October 25th, 2008, 11:52 AM
  2. Cylinder volume vs compresion tuning
    By wadesns in forum Gen III V8 Specific
    Replies: 10
    Last Post: November 6th, 2007, 02:24 PM
  3. Heads = Zero HP Gain
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 17
    Last Post: August 31st, 2006, 12:13 PM
  4. EFILive IL6 (6 cylinder) Tuning
    By Blacky in forum General (Petrol, Gas, Ethanol)
    Replies: 61
    Last Post: April 27th, 2006, 01:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •