Diff &Trans adj.

[driver456]

Where it says TRANSMISSION SHIFT POINT ADJUSTMENT in EFILive tune,speedometer,When I changed from 3.42 to 3.73 and 26in dia. tire it changed from 00.percent to -26.71 but when I saved it,It went back to zero percent.Do I manually change it or just leave it alone?....Thanks........Paul

[jfpilla]

Where it says TRANSMISSION SHIFT POINT ADJUSTMENT in EFILive tune,speedometer,When I changed from 3.42 to 3.73 and 26in dia. tire it changed from 00.percent to -26.71 but when I saved it,It went back to zero percent.Do I manually change it or just leave it alone?....Thanks........Paul

You don't mention if you made the adjustment before you saved. If you adjusted then saved it goes to 0.

[driver456]

Thank You,Paul helped me out.And I got it all squared away

[jfpilla]

Thank You,Paul helped me out.And I got it all squared away

Mind sharing?

[driver456]

Mind sharing?

Oh boy,its kind of confusing.But I'll try to explain.I had 3.42 gears put in.The PCM was programmed for the 3.42's.Then I took them out and put in 3.73's.I bought a hand held programmer(which I'am selling) And programmed my PCM for the 3.73's,But then decided to get EFILive ,Which is taking over my life .I tried to flash my PCM,And read the calibration's,But it would not work.So I thought a minute and figured the hand held must have locked the PCM.Sooooo with the hand held I programmed the PCM back to stock and it set the gear ratio back to 2.73.So now EFILive works.Then I programmed it back w/EFILive to 3.42 then back to 3.73. I explained to Paul what I did,Then he told me what to do.I don't even remember how I did it,But I think I have worked it out.I think.

[jfpilla]

Not confusing. It makes sense.
Thanks
Joe