EFILive RC 1 (March 01, 2013)

[joecar]

See my responses in red ink:

Have not seen this problem posted yet.

When using EFILive scan & tune, F5, BBX.
When setting up selected PIDs, PID properties, Custom PID properties. The quick select unit are not showing saved when selecting OK.
> post a screenshot.

While BBL the V2 displays metric, but playback the saved log file displays the correct units that were selected.
> V2 and V7 scantool units display is regardless... in scantool, pids can be displayed in either units.

When adding pre selected Calculated PID names to V7 Scan Tool Compatibility Settings. The PIDs don't show in the logged playback file. You have to manually select the PID to display in the playback. They are in the option.txt.
> calc pids won't show on V2, but they should be preselected when you view the log file in the V7 scantool... did you specify the full pid name (e.g. "CALC.WO2BEN")...?

[Blacky]

When using EFILive scan & tune, F5, BBX.
When setting up selected PIDs, PID properties, Custom PID properties. The quick select unit are not showing saved when selecting OK.

Confirmed. Fixed in RC2.

While BBL the V2 displays metric, but playback the saved log file displays the correct units that were selected.

Confirmed. Fixed in RC2.

When adding pre selected Calculated PID names to V7 Scan Tool Compatibility Settings. The PIDs don't show in the logged playback file. You have to manually select the PID to display in the playback. They are in the option.txt.

Confirmed. Fixed in RC2

Thanks for finding and reporting these issues.

Regards
Paul

[SkinnyPedal]

I am getting random access denied issues. I provided a screen shot.

[joecar]

I am getting random access denied issues. I provided a screen shot.

You have to run EFILive software with Administrator privileges...

Win 7/8 is preventing EFILive software from writing that file in that folder because it was not run with sufficient privilege (i.e. need Administrator rights in order to write in that folder).

[SkinnyPedal]

Thanks! Never ran into that until installing RC 1.

[Blacky]

RC2 is now available here:
http://forum.efilive.com/showthread....016#post189016