Results 1 to 6 of 6

Thread: 10-15 tune compatability

  1. #1
    New Member
    Join Date
    Nov 2013
    Posts
    7

    Default 10-15 tune compatability

    trying to figure out the tune compatabilities and how the serial,and os plays a part in how 1 tune will transfer to another truck.

  2. #2
    Junior Member
    Join Date
    Apr 2015
    Posts
    41

    Default

    10-12 are different ECM's. No compatibility. Way easier to just use the proper stock file for each E/C Code.

  3. #3
    New Member
    Join Date
    Nov 2013
    Posts
    7

    Default

    I know but how do i know if 2 2012 trucks are a compatible tune

  4. #4
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    The documentation shows how to determine the current calibration, you could do that for both to see if they match when you compare them to the Cummins flash availability document. Details are here http://content.efilive.com/documents...tart.pdf#page7

    Cheers
    Cindy
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    New Member
    Join Date
    Nov 2013
    Posts
    7

    Default

    Thank you cindy, also i purchased a csp5 tune from a reputable tuner and i flashed with my v2 but when i go into my v2 to switch it wont allow me saying the current module isnt suported and when i try to read the file it only pops up lmm duramax as a module. How do i change that to the cm2100?

  6. #6
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    Moving the tune file to the V2 is only part of the puzzle, you also need to configure the V2 for reading/flashing, logging, and switchable tuning. Instructions can be found here https://support.efilive.com/kb_artic...6659-YAHB-3781

    Cheers
    Cindy
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. swapping ECM's, compatability
    By killerbee in forum Duramax LB7
    Replies: 6
    Last Post: November 11th, 2011, 03:04 AM
  2. ECM compatability
    By paintballrepins in forum General (Diesel)
    Replies: 2
    Last Post: June 30th, 2011, 01:43 AM
  3. Trans compatability question
    By Chevcaprice94 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 2
    Last Post: May 1st, 2011, 10:08 AM
  4. OS Compatability
    By vortecyota in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: November 13th, 2009, 10:23 AM
  5. ECM Compatability
    By Cougar281 in forum Duramax LLY
    Replies: 1
    Last Post: January 9th, 2007, 11:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •