Results 1 to 10 of 10

Thread: lb7 boot loader rejected

  1. #1
    Junior Member hotrod87's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default lb7 boot loader rejected

    im trying to read the stock tune in a 03 lb7 will not unlock ecm keeps sayin boot loader rejected. vin is something like 2?????????#?? had a banks disabled speed loader and hooked up bale connecters as factory??? also tried alt keys and low speed..
    Last edited by hotrod87; February 23rd, 2013 at 12:42 PM.

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Probably corrupted by TIS during a dealer update, not much that can be done unfortunately if you have already tried the ALT Keys option.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member hotrod87's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default

    I worried about that.. so basically need different ecm then? if so what needs to be done with a different used ecm to make it work with the truck :( thanks for the help..
    Last edited by hotrod87; February 23rd, 2013 at 06:07 PM.

  4. #4
    Junior Member hotrod87's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default

    not sure if these will help
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	gch.jpg 
Views:	281 
Size:	765.5 KB 
ID:	14644   Click image for larger version. 

Name:	2013-02-23_16-57-39_814.jpg 
Views:	325 
Size:	947.2 KB 
ID:	14643  
    Last edited by hotrod87; February 23rd, 2013 at 06:18 PM.

  5. #5
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    Disconnect the batteries for 30 minutes, then reconnect them and try to pull the tune with the V8 software. I know I have ran into the bootloader error with my own LB7 on more than one occasion with the V7.5 software, but the V8 normally goes through.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  6. #6
    Junior Member hotrod87's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default

    I do see that I have dsp5 tune and that OS matches the gm OS for this truck.. but im guessing it wont let me flash either let alone flash over

  7. #7
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    You NEED the stock tune to start with, TRUST ME on this one. Your other tune may work, then again it could disable your power windows, locks, shut your A/C off, no cruise, and a host of other issues could occur by putting the wrong tune file into a 03-05 truck.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  8. #8
    Junior Member hotrod87's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default

    Ok thanks i wont try it lol.. but i will try the v8 but does that look like it could be corrupt in the pics thanks

  9. #9
    Junior Member hotrod87's Avatar
    Join Date
    Feb 2013
    Posts
    13

    Default

    well I got a used ecm out of a 03 and put it in and read the stock tune in that ecm just fine.. OS ended up being the exact same except the speedo calibration number.. so I changed the vin and it starts and no security problems thanks guys but what could be different in the speedometer system? old speed id # was 15076393 new was 15076392

  10. #10
    New Member
    Join Date
    Jan 2010
    Posts
    2

    Default

    I had my truck reflashed because i didnt have the stock tune and the GM tech was having issues reflashing it because i had an aftermarket radio so he had to install his stock radio so he could finish reflashing my truck and my truck is saying the same thing now as yours was hotrod87. So the only fix to this issue is buying a new ECM???
    2001 LB7

Similar Threads

  1. Boot loader rejected, custom key?
    By Wheelz in forum Duramax LB7
    Replies: 12
    Last Post: February 12th, 2013, 04:10 AM
  2. Boot loader rejected
    By nonnieselman in forum Gen III V8 Specific
    Replies: 8
    Last Post: September 27th, 2012, 01:09 PM
  3. boot loader problem
    By skyhighsami in forum Diesel
    Replies: 7
    Last Post: July 7th, 2010, 06:50 PM
  4. Bootloader rejected
    By lilly in forum Duramax LLY
    Replies: 12
    Last Post: June 28th, 2009, 02:48 AM
  5. Boot Loader Error
    By dlandsvZ28 in forum FlashScan V1
    Replies: 9
    Last Post: June 24th, 2007, 02:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •