Results 1 to 3 of 3

Thread: New Tune File Shows Up In Explorer But Will not load to Autocal

  1. #1
    New Member
    Join Date
    Nov 2010
    Posts
    2

    Default New Tune File Shows Up In Explorer But Will not load to Autocal

    Hello.New here.I received an Autocal from a reputable tuner with a DSP5 tune.I was able to flash it into the ECM without any issue.Unfortunately,I was not able to switch tunes.My tuner sent me the same file to try again with the same negative results once again.After checking ECM plug pin locations and testing the switch it was determined that the tune file was corrupt.He emailed me the new tune but it shows up in Explorer and won't load onto the Autocal.Finally,the tuner walked me through getting the tune loaded using my laptop and Autocal as a passthrough.Problem is;the old tune (which is no good) is still on the Autocal and the new tune sitting in the Explorer program.What can I do to resolve this?I don't want to delete any critical data from the Autocal to make room for the updated tune.Thanks for any help.-Andy.
    2008 Duramax Allison LTZ
    DPF delete/EGR Blocked.
    Autocal.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Use EFILive Explorer to delete the old tune from AutoCal...

    goto Data Files tab, on bottom left pane click on Tune folder, on bottom right pane you should see your old tune file, on it do rightclick->Delete.

  3. #3
    New Member
    Join Date
    Nov 2010
    Posts
    2

    Default

    Quote Originally Posted by joecar View Post
    Use EFILive Explorer to delete the old tune from AutoCal...

    goto Data Files tab, on bottom left pane click on Tune folder, on bottom right pane you should see your old tune file, on it do rightclick->Delete.
    OK thanks I did this.I now have the new tune loaded and 1.8mb space available.
    2008 Duramax Allison LTZ
    DPF delete/EGR Blocked.
    Autocal.

Similar Threads

  1. Code 0536 tune file not registerd to autocal device
    By manny sts v in forum AutoCal
    Replies: 1
    Last Post: January 10th, 2013, 10:47 AM
  2. Replies: 1
    Last Post: November 16th, 2012, 03:12 AM
  3. Replies: 4
    Last Post: March 15th, 2012, 08:51 AM
  4. Can't Load a File
    By L31Sleeper in forum General (Diesel)
    Replies: 35
    Last Post: July 16th, 2010, 08:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •