Results 1 to 9 of 9

Thread: 2010 Camaro Cam, Boltons EFILIVE tuning 10.87 @ 124

  1. #1
    Lifetime Member Rhino79's Avatar
    Join Date
    Jul 2006
    Posts
    298

    Default 2010 Camaro Cam, Boltons EFILIVE tuning 10.87 @ 124

    Well guys, I set the record for a stock head/bottom end fifth gen I believe last friday night, thanks largely in part to Efilive and their awesome tuning suite. All work and tuning performed by me here at Gwatney Performance Innovations in Jacksonville Arkansas. We also did that turbo v6 5th gen car too.
    The engine is a cam only setup with bolt ons, ported intake and throttle body. It IS a vvt cam by mast motorsports and circle d 4000 stall with 3.91 gears. Transmission is 45000 mile bone stock tranny with no tq mgt since 11000 miles and obviously utilizing the tq model tuning capability to my advantage! Suspension is 100% stock with no front sway bar.

    Thanks Paul and Ross for the support along the way! Time for heads and suspension and hopefully 10.50s all motor this fall!

    http://www.youtube.com/watch?v=gi8guE3jCfs
    Head Calibrator
    Gwatney Performance Innovation
    Jacksonville, AR 501-982-2102

  2. #2
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    656

    Default

    congrats for the record man nice number
    would you mind post the gear tune file or pm it me
    EFILive Tuner

  3. #3
    Lifetime Member Rhino79's Avatar
    Join Date
    Jul 2006
    Posts
    298

    Default

    PM me your email, I dont mind sharing but I have a lot of time in this tune....lol.
    Head Calibrator
    Gwatney Performance Innovation
    Jacksonville, AR 501-982-2102

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,110

    Default

    Good job, thanks for the vid.

  5. #5
    Lifetime Member wesam's Avatar
    Join Date
    May 2010
    Posts
    656

    Default

    pm sent
    EFILive Tuner

  6. #6
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,121

    Default

    Nice one Ryan, camera man needs a little help though


  7. #7
    Member scottcmb's Avatar
    Join Date
    Aug 2011
    Posts
    97

    Default

    Congrats Ryan......look forward to more!!

    Scotty
    2008 HSV GTS LS3

  8. #8
    Junior Member
    Join Date
    Feb 2009
    Posts
    24

    Default

    I'm really impressed with the 124 mph!!! Is that car stock weight other than the wheel/tire combo? Congrats!!!

  9. #9
    Lifetime Member Rhino79's Avatar
    Join Date
    Jul 2006
    Posts
    298

    Default

    I had 80 lbs in seats off of it. Still is 3780 in raceweight.
    Head Calibrator
    Gwatney Performance Innovation
    Jacksonville, AR 501-982-2102

Similar Threads

  1. 2010 camaro tuning
    By beaukz28 in forum Gen IV V8 Specific
    Replies: 9
    Last Post: March 1st, 2013, 06:51 AM
  2. Replies: 1
    Last Post: January 29th, 2013, 04:31 PM
  3. Tuning a 2010 Camaro
    By pavetim in forum Gen IV V8 Specific
    Replies: 1
    Last Post: January 12th, 2011, 02:05 PM
  4. 2010 Camaro DOD Cam Phasing Table ?
    By RonC in forum Gen IV V8 Specific
    Replies: 10
    Last Post: August 27th, 2009, 02:03 PM
  5. 2010 Camaro tuning
    By GMPX in forum Gen IV V8 Specific
    Replies: 40
    Last Post: August 1st, 2009, 01:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •