Results 1 to 5 of 5

Thread: RTACS on Main VE and Boost VE at the same time?

  1. #1
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    243

    Default RTACS on Main VE and Boost VE at the same time?

    Can you update the Main VE and Boost VE at the same time or do i need to just have one turned on at a time?

    The reason i ask, is when i have both enabled the 105 column on the boost VE table updates below 105... Does that make sense?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,777

    Default

    I'm not sure, but it seems to mean that you can only have one table active at a time... (I haven't played with my RR sufficiently).

  3. #3
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    243

    Default

    Well i was able to figure it out. It took awhile. Basically you have to build a custom pID for each table. You also have to build in a MAP check to filter out MAP settings above/below the table boundaries. Once i get back to my laptop i will post up the PIDs if anyone is interested.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,777

    Default

    I'm interested, please/thanks.

  5. #5
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    243

    Default

    I did a write up on PerformanceTrucks.net

    http://www.performancetrucks.net/for...6/#post5084192

Similar Threads

  1. RTACS and boost VE?
    By DrX in forum RoadRunner Real-Time PCM Emulator
    Replies: 37
    Last Post: August 25th, 2014, 04:00 AM
  2. Main and Boost VE...one table?
    By hquick in forum Custom Operating Systems
    Replies: 9
    Last Post: February 20th, 2008, 06:10 PM
  3. Main VE and Boost VE looks weird
    By ForcedC5 in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: December 19th, 2007, 12:20 PM
  4. LBZ Main Injection Pulse Time
    By JoshH in forum Diesel
    Replies: 15
    Last Post: May 10th, 2007, 09:04 PM
  5. Real-Time Automated Calibration System (RTACS)
    By GMPX in forum General (Petrol, Gas, Ethanol)
    Replies: 89
    Last Post: May 7th, 2007, 01:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •