Results 1 to 2 of 2

Thread: advice need wirth AEM widband

  1. #1
    Senior Member restless@westnet.com.au's Avatar
    Join Date
    Aug 2008
    Posts
    199

    Default advice need wirth AEM widband

    HI guys
    do i need to run the power for 30-2310 aem wide band through a rely or can i just conect to 12v switched power some were ?? were is the best place
    its on a E3 MALOO
    THANKS Bob

  2. #2
    Lifetime Member
    Join Date
    May 2012
    Posts
    228

    Default

    Just get a good chassis ground and run the 12v switched. I have heard of and have on mine a little feedback noise on my AEM wideband. I have tried 3 different sources for 12v switched. A power filter may be needed if it annoys you.
    Specifically on ur car I cant say since I am in US and not familiar with the Maloo. But tpically get the aftermarket 'alarm' wiring instructions that an installer would use to install an alarm. That should give you the location and color for the main 12v ign power source.

Similar Threads

  1. LC-1 widband hook up
    By ace68 in forum General
    Replies: 185
    Last Post: November 15th, 2016, 06:40 AM
  2. AEM UEGO to EFILive v1?
    By Tan327 in forum General
    Replies: 4
    Last Post: July 25th, 2011, 11:26 AM
  3. AEM compatibility??
    By Chuck L. in forum External A/D inputs
    Replies: 3
    Last Post: July 4th, 2011, 08:50 AM
  4. Help setting up AEM WB
    By SUPERTRUCKER in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: April 18th, 2009, 09:22 AM
  5. Anyone using AEM WB?
    By 12sec.5.3 in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: October 25th, 2006, 03:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •