Results 1 to 3 of 3

Thread: Throttle Position readings

  1. #1
    Junior Member Strong05's Avatar
    Join Date
    Sep 2010
    Posts
    44

    Default Throttle Position readings

    I just made a simple diagnosis run on my brothers 06 I4 manual Colorado and noticed what I thought was an anomaly with the throttle position readings. Minimum TP was 12.2% and max was 89.4% at WOT. The only other throttle by wire system I've logged in is my LB7 (D-max) and it always shows 0% at idle and 100% at WOT throttle. So my question is: Is this the way it should operate or should I be seeing 0% at idle and 100% at WOT? If it's wrong could I have done something wrong with the EFI live scan tool/software?

    Thanks in advance for your help!

    Brad
    2000 WS6 T/A White M6, Mods: SLP Lid, Pro 5.0, LS7 clutch, QTP headers, LS6 intake, UMI: adj TA, BMR: LCA, STB, SFC, and adj PB. Best ET of 13.7 @ 107mph.

  2. #2
    Lifetime Member
    Join Date
    Mar 2006
    Posts
    4,937

    Default

    You need to use a different PID, for ETC gas stuff there are (usually) 3 throttle position PIDs (well 2 plus accelerator pedal position). Im betting you're using SAE.TP, validate the PIDs again then see which of the GM.ETCTP PIDs shows up as supported for it. Try logging with that.

    It will never show 0% TPS because on DBW vehicles the throttle is never fully closed except when the engine is off. DBC vehicles go to 0% TPS because the IAC allows enough airflow for the engine to idle, ETC setups open the throttle blade slightly to accomplish the same thing.
    ~Erik~
    2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
    2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
    2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.

  3. #3
    Junior Member Strong05's Avatar
    Join Date
    Sep 2010
    Posts
    44

    Default

    Thanks Erik! I was afraid I might have been overlooking something. I'll re-verify the pids and re-log.

    Thanks,
    Brad
    2000 WS6 T/A White M6, Mods: SLP Lid, Pro 5.0, LS7 clutch, QTP headers, LS6 intake, UMI: adj TA, BMR: LCA, STB, SFC, and adj PB. Best ET of 13.7 @ 107mph.

Similar Threads

  1. Throttle Position
    By bstuder11 in forum Gen IV V8 Specific
    Replies: 6
    Last Post: April 7th, 2012, 11:12 PM
  2. Throttle position Pid
    By zbadestz in forum General
    Replies: 10
    Last Post: February 26th, 2012, 12:52 AM
  3. Throttle position confuddlement
    By turboberserker in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: June 2nd, 2010, 06:18 AM
  4. Absolute Throttle Position
    By mvnvltn in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: December 29th, 2008, 09:22 PM
  5. Throttle position 256%
    By vatman02 in forum General
    Replies: 14
    Last Post: September 27th, 2007, 05:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •