Tune Upload
Question - If a customer brings you a vehicle that has a tune file loaded into the PCM from his autocal, which is linked to another shops V2, and you perform a new tune and flash his ecm... Can that customer then upload your tune file into his autocal?
No, you can flash it back to stock and then put whatever tune you want in it (assuming the ECM/PCM isnt locked).
But, they will NOT be able to reflash it. You have no way of linking the original tuner's V2 serial number to the new tune file in order to use the customer's AutoCal as a flashing device.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Our April 2013 public release software features AutoCal unlinking.
In simple terms the original FlaschScan V2 used to link to the AutoCal is required to perform the unlinking. Once unlinked, the AutoCal is free to be relinked to another FlashScan V2 device.
An explanation on how this feature works is contained in our April 2013 newsletter http://myemail.constantcontact.com/E...id=CB39684oDlg
Cheers
Cindy
Neat!
Posting Permissions
Reply With Quote