Results 1 to 6 of 6

Thread: LMM dpf delete P0101 any help? (Canada)

  1. #1
    New Member
    Join Date
    Mar 2013
    Posts
    7

    Default LMM dpf delete P0101 any help? (Canada)

    this is my uncle truck did a dpf delete for fuel economy, added turbo brake, keep stock tune and k&n filter! everything was fine but yesterday it threw P0101 mass air flow performance code! do i need to modified the stock mass air flow data for the added flow if there is? any tips?

  2. #2
    Lifetime Member dansdieselp's Avatar
    Join Date
    Apr 2009
    Posts
    606

    Default LMM dpf delete P0101 any help? (Canada)

    Put the stock air filter back in.
    Dan's Diesel Performance
    www.dansdieselperformance.com

  3. #3
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    Quote Originally Posted by dansdieselp View Post
    Put the stock air filter back in.
    And get some MAF cleaner to clean the MAF off with as it is probably oiled from the K&N filter.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  4. #4
    Lifetime Member tokymon's Avatar
    Join Date
    Apr 2008
    Posts
    227

    Default

    i have seen where the air will stall when comming to a stop usually with cai, if this is happening while comming to a stop, adjust maf failure air (sorry at work and cant rember the table #)
    97 2500 ecsb 5.7l/4l80e/4x4 411 pcm /thorley tri-y's/dual super 40's with x (catless)/aem cai/msd 6a and coil/zz4 cam/beehive spring/lm-1

    stock sucks

  5. #5
    New Member
    Join Date
    Mar 2013
    Posts
    7

    Default

    new update! it happen again this time he was driving on the highway cruising and the check engine came on again! yeah the first time it was coming to a stop. i did adjust the upper limit thresold

    those are the Maf sensor Parameter any thing to change? the lower value maybe?

    {C0905} P0101 Test Enable, Coolant Temp Low -20,065310 °C
    {C0906} P0101 Test Enable, Coolant Temp High 99,922690 °C
    {C0907} P0101 Test Enable, RPM Low 500,000000 RPM
    {C0908} P0101 Test Enable, RPM High 3100,000000 RPM
    {C0901} P0101 Lower Limit Threshold 20,055499 Grams/Second
    {C0902} P0101 Lower Error Time 15,000000 Seconds
    {C0903} P0101 Upper Limit Threshold 49,999860 Grams/Second
    {C0904} P0101 Upper Error Time 300,000000 Seconds

  6. #6
    New Member
    Join Date
    Mar 2013
    Posts
    7

    Default

    he did say the truck feel low on power when the light came on!

Similar Threads

  1. Dpf/egr delete for an lmm
    By TERYX08 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: December 18th, 2012, 07:22 AM
  2. LMM DPF/EGR delete with Banks Six gun
    By JustinD in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 8
    Last Post: September 19th, 2012, 11:50 AM
  3. Dpf delete
    By relentless addiction in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: February 25th, 2011, 04:41 PM
  4. Dpf delete
    By LIL DAVE in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: September 9th, 2009, 06:24 AM
  5. 7.5 LMM DPF delete and EFI V2
    By clickjocky in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 9
    Last Post: February 5th, 2008, 02:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •